Amprobe DM73C Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Multimetro Amprobe DM73C. Amprobe DM73C 14. Pen style dmm

Automatic Shutdown

This function causes the meter to enter power saving mode after

approximately 10 minutes. Disable automatic shutdown by holding

the shift button down while turning the meter on.

In Case of Difficulties In the case of improper operation of the

meter, first review the operating instructions for possible errors in

operation. Inspect and check test leads for continuity. Check the

condition of the batteries. The battery "

the voltage falls below the level where accuracy is guaranteed.

Replace batteries immediately.

Gently wipe dirt from the surface of the unit with a soft cloth

moistened with a small amount of water or neutral cleanser. Do not

use benzene, alcohol, acetone, ether, paint thinner, lacquer or

ketone solvents on the units, under any circumstances as these

may cause deformation or discoloration.

All test tools returned for warranty or non-warranty repair or for

calibration should be accompanied by the following: your name,

company's name, address, telephone number, and proof of

purchase. Additionally, please include a brief description of the

problem or the service requested and include the test leads with the

meter. Non-warranty repair or replacement charges should be

remitted in the form of a check, a money order, credit card with

Warning: In order to avoid electrical shock,

remove the test lead before opening the

case. To replace the batteries ( 2 – LR44)

unscrew the battery hatch screw and remove

the old batteries. Install the new batteries

observing the diagram in the battery area.

REPAIR

" symbol appears when