Amprobe DM7C Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Multimetro Amprobe DM7C. Amprobe DM7C 12.

1 pc. Amprobe Multimeter DM7C

1 pc. Holster

2 pcs. Test Leads (1ea. red, 1ea. black)

1 pc. Battery 9 V IEC 6F22 or 6LR61

1 pc. Users Manual

• Please keep the original packaging for later transport, e.g. for calibration. Any

transport damage due to faulty packaging will be excluded from warranty claims.

• In order to avoid instrument damage, it is advised to remove batteries when not using

the instrument over a certain time period. However, should the instrument be

contaminated by leaking battery cells, you are kindly requested to return it to the

factory for cleaning and inspection.

• Instruments must be stored in dry and closed areas. In the case of an instrument

being transported in extreme temperatures, a recovery time of minimum 2 hours is

required prior to instrument operation.

• The Amprobe multimeter DM7C has been manufactured and tested to comply with

the safety regulations for electronic measuring equipment contained in IEC61010

and EN 61010, and left the factory in a safe condition. To maintain this condition, the

user must observe the safety instructions contained in this users manual.

• To avoid electric shock, safety measures must be observed when working with volt-

ages higher than 120 V (60 V) DC or 50 V (25 V) RMS AC. These are the

values of threshold contact voltages given by DIN VDE.

• Before each measurement make sure that the test leads and the instrument are un-

damaged.

• Only handle test leads and probes on the grips provided. Avoid touching probes under

any circumstances.

• Measurements in dangerous proximity of electrical installations are only to be exe-

cuted when instructed by a responsible electrical specialist, and never alone.

• The relevant safety regulations for electrical plant and equipment must be

observed during all operations.

• The instrument must only be used in the specified ranges.

• Before opening the instrument, it must be disconnected from all circuits.

• Protect the instrument from prolonged exposure to direct sunlight.

Contents