Amprobe PM51A Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Multimetro Amprobe PM51A. Amprobe PM51A 12. Pocket multimeter

Battery Replacement

If the meter starts up with persistent resetting display or with low battery icon N turns on, replace

the battery. The meter uses one 3 V coin battery, IEC-CR2032.

To replace the battery

1. Turn off the meter and disconnect the test leads from live circuits.

2. Loosen the screw on the case bottom.

3. Lift the end of the case bottom nearest the input test leads until it unsnaps from the case top.

Replace the battery cover and tighten the screw. Recycle the battery using approved methods.

4. Replace the battery. Observe battery polarities with positive (+) faces up (towards the case

bottom). Replace the case bottom, and ensure that the snap on the case top (near the LCD side)

is engaged.

5. Replace and tighten the screw.

To avoid electrical shock, disconnect test leads from live circuits before opening

the case. Do not operate with open case.

XWWARNING