DPCAV PANDORA Manuale
Sfoglia online o scarica il pdf Manuale per Unità di controllo DPCAV PANDORA. DPCAV PANDORA 7. Pan & tilt kit
Stampa la pagina
The items shown in the photo below are provided in the kit. Be sure to check for missing parts
BEFORE your start assembly.
The following items are supplied by you:
1.
Pan axis servo: Hyperion HP-DS12HCP or Hitec HS-81 R/C Servo. The HS-81MG (metal
gear) version is not recommended due to its limited travel range.
2.
Tilt axis servo: Hitec HS-65HB R/C Servo. Alternate: generic 9-gram R/C servo, 20oz/in or
greater torque, max size 0.95"L x 0.45"W x 0.9"H.
3.
Cased KX-131 (KT&C KPC-S226CB) or uncased Panasonic CX-161 CCD board camera.
4.
15 minute epoxy.
5.
Loctite Threadlocker (Blue #242).
6.
Manual or electric drill.
7.
Screwdriver set.
8.
Small file or sharp hobby knife.
9.
Optional: 25W to 40W soldering iron and electrical solder.
P
(
), www.dpcav.com
ANDORA
REV-C
P
ANDORA
Pan & Tilt Kit (REV-C)
www.dpcav.com
Figure 2, Kit Contents
Page 1
©2007-2008 Jun-11-2008