DPM PosiTector Manuale rapido - Pagina 6

Sfoglia online o scarica il pdf Manuale rapido per Strumenti di misura DPM PosiTector. DPM PosiTector 10. Dew point meter

The PosiTector DPM can automatically display and record

datasets at user selected time intervals. When selected, the Auto

Log icon

until the next dataset is stored. Connect the instrument to a USB

power source for long-term use.

Turn on instrument/

Cancel Auto Log

mode

Standard models

The instrument will take readings for 40-50 hours on a set of fresh

alkaline batteries, depending on the frequency of measurements.

Advanced models

batteries. At each interval, the instrument will wake up, take a

reading, sync to PosiTector.net (if configured) and power down.

The instrument can record approximately 8,000 datasets while in

this mode using fresh alkaline batteries, or approximately one

reading every hour for eight months.

NOTES:

-Auto Log continues recording until memory is full, the instrument

loses power, or the user turns off Auto Log mode. Stored datasets

will remain in memory.

-To conserve battery life, readings update only at the Log Interval.

The last recorded readings will remain "frozen" on the display until

the next dataset has been stored.

-It is recommended that fresh alkaline batteries, or newly

recharged batteries be installed prior to an extended Auto Log.

Auto Log Mode

Auto Log

will appear on the display, with a countdown timer

remain powered-up while in auto log mode.

power down between readings to conserve

Scroll through dis-

play modes

(Advanced only)