Amptweaker FatRock Manuale d'uso - Pagina 2
Sfoglia online o scarica il pdf Manuale d'uso per Pedale musicale Amptweaker FatRock. Amptweaker FatRock 4.
How does the
PlexEQ–sets
EQ to vintage
stack tone
Volume–
a Master
Volume,
set for
boost or
balance
with
bypassed
levels
Output
Jack–
connect to
the next
pedalʼs
input or
amp
SideTrak Loop- this
loop is active when the
FatRock is bypassed.
Send to ʻclean effectsʼ
Input, Return from ʻclean
effectsʼ Output. See back
page for other ideas.
Noise Gate–
Tone–EQ,
reduces noise,
shelves
adjusts
highs up
threshold
and down
automatically
to balance
with gain
with lows
adjustment
True Bypass
Switch–directly
connects Input
Jack through the
SideTrak loop to
the Output Jack.
work?
Gain & Boost SW–
controls amount of
distortion: vintage
gain with Boost out
and Gain low, and
modern high-gain
tones when cranked!
Tight– set
higher for an
aggressive,
chunky attack-
lower for thick,
fatter distortion
DC Jack– use
regulated 9V–
18VDC supply
with center pin
grounded–9V
sounds like a
50W amp tone
while 18V is a
cleaner, louder
100W tone.
Like a variac!
Input Jack–from
guitar or previous
effect. The battery
disconnects when
unplugged