Comelit Icona 6601W/BM Manuale tecnico - Pagina 4
Sfoglia online o scarica il pdf Manuale tecnico per Monitor Comelit Icona 6601W/BM. Comelit Icona 6601W/BM 17. 2-wire door entry monitor
Anche per Comelit Icona 6601W/BM: Manuale tecnico (20 pagine), Manuale d'uso (7 pagine), Manuale d'uso (18 pagine)
Stampa la pagina
Touch-sensitive button activation
1
2
Buttons
Audio activation
Lock-release activation
Buttons 1-2-3-4-5 (programmable)
Self activation (programmable)
Ringtone activation in silent mode
(Privacy mode)
Audio volume adjustment
Call volume adjustment
Increase / Decrease value
Contrast adjustment
Brightness control
Press and hold keys
Pressing and holding keys adds further functions to the door entry monitor.
Carry out the procedure described below to enable - or disable, depending on the factory setting - the press and hold
feature:
√
Door entry monitor in standby.
1.
Take note of the S2 DIP-switch settings.
2.
Enter programming mode by setting S2 DIP-switches 1, 3, 5 to ON.
3.
Press to enable (or press
4.
Make sure the
5.
Restore the initial configuration of the S2 DIP-switches.
Once the enabling procedure is complete, you will be able to enable the following functions:
Automatic door opening on receipt of call (Doctor mode)
f Press and hold (4 sec.) the programmed button (default: Key 3) to enable/disable the function.
Automatic answer (Hands-Free function)
f Press and hold (4 sec.) the audio activation button
4
(Disabled by default from firmware version 1.5.0)
to disable).
key flashes 4 times and the confirmation tone is emitted.
f Swipe to enable the row (1) of function buttons.
f Swipe again to enable the row (2) of adjustment buttons.
f Press the desired button once to activate the function
associated with it
Wait for approximately 1 sec. before pressing
the same button again. Pressing the same
button several times in quick succession will
cancel the command.
Indicator LED
continuous flashing = incoming call
LED steady in call = communicating
LED steady in standby = Automatic answer mode
(Hands-free mode) enabled
continuous flashing = incoming call
1 flash = confirm lock-release
4 flashes = programming successful
10 flashes = programming error
LED steady = ringtone in silent mode
(Privacy mode)
3 flashes (every 5 s.) = Automatic door opening on
receipt of call mode (Doctor mode) enabled
slow flashing = programming
4 flashes = device busy
to enable/disable the function.