Comelit 1469 Manuale di programmazione - Pagina 7

Sfoglia online o scarica il pdf Manuale di programmazione per Apparecchiature di registrazione Comelit 1469. Comelit 1469 10.
Anche per Comelit 1469: Manuale tecnico (11 pagine)

Stampa la pagina
Comelit 1469 Manuale di programmazione
| Table of contents |
•
ViP address: ViP address corresponding to the Simplebus internal unit
•
Master / Slave
EXTERNAL UNITS
•
External units ViP address: enter the ViP address for all external units that need to be reached by the
Simplebus internal unit
INTERNAL UNITS INPUT FUNCTION (PAN/AL – CFP)
ALARM / PANIC
•
Function: action to be carried out if the input is activated.
◊ Disabled: no action.
◊ Priority call 1: while the input is active, a priority call is made to the ViP address set in the switchboard
ViP address parameter.
◊ Priority call 2: while the input is active, a priority call is made to the ViP address set in the switchboard
ViP address parameter.
◊ Priority call 3: while the input is active, a priority call is made to the ViP address set in the switchboard
ViP address parameter.
◊ Priority call 4: while the input is active, a priority call is made to the ViP address set in the switchboard
ViP address parameter.
•
Switchboard ViP address: ViP address of the switchboard to which the priority call should be forwarded.
FLOOR DOOR CALL
•
Function: action to be carried out if the input is activated.
◊ Disabled: no action.
◊ Priority call 1: while the input is active, a priority call is made to the ViP address set in the switchboard
ViP address parameter.
◊ Priority call 2: while the input is active, a priority call is made to the ViP address set in the switchboard
ViP address parameter.
◊ Priority call 3: while the input is active, a priority call is made to the ViP address set in the switchboard
ViP address parameter.
◊ Priority call 4: while the input is active, a priority call is made to the ViP address set in the switchboard
ViP address parameter.
◊ Switchboard ViP address: ViP address of the switchboard to which the priority call should be forwarded.
ACTUATORS (ACT)
Actuator modules 1443 and SK9071, which need to be controlled by the buttons on the Simplebus internal
units, must be programmed in this section of the directory.
•
Actuator code: enter the address of the actuator configured on the buttons of the SimpleBus internal units.
•
Actuator module ViP address: enter the ViP address of the actuator module you want to use.
•
Expansion index: select where the output to be activated is located, in the actuator module or in one of the
connected expansion devices.
•
Output: select the output to be activated on the actuator module or expansion device.
SWITCHBOARDS
•
Switchboard ViP address: ViP for the main switchboard and the secondary switchboard that can be called
if the Simplebus internal units are programmed with the relevant call function on one of their buttons.
7