AmScope AM-1 Series Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Microscope AmScope AM-1 Series. AmScope AM-1 Series 19.

SM-1 Series

Adjusting Focusing Tension

1. To adjust the tension of the focusing knobs, grab both sides of the focusing knob and twist them opposite of

each other.

2. To decrease tension, rotate in the opposite direction. Typically, adding tension is done by rotating the right knob

clockwise and the left counterclockwise, so the opposite would hold true if releasing tension (if it is too hard to

adjust the focal height, for example).

Note: If your focusing rack/head is slipping down, you need to increase the tension.

- All glass surfaces must be kept clean. Fine dust on the optical surface should be blown off using a hand blower or

gently wiped off with a soft lens paper tissue/nonabrasive lint free cloth.

- Carefully wipe off oil or fingerprints on the lens surfaces using tissue moistened with a small amount of lens

cleaner (we recommend Sparkle brand optical cleaner).

- Do not use Sparkle to clean other elements of the microscope. Use a neutral detergent on any plastic or painted

surfaces.

- Do not assemble or disassemble the microscope's electrical components yourself without advisement from one of

our technicians. Doing so will void your warranty unless by advisement of one of our technicians to do so.

- After use, cover the microscope with the provided dust cover.

- Keep your AmScope microscope in a dry, clean location in order to prevent rust or other damages.

Operation