DR. Heater DR-P2100 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Riscaldatore DR. Heater DR-P2100. DR. Heater DR-P2100 13. Heavy-duty electric unit heaters

If your heater fails to operate, please follow these procedures:

This heater has a thermal cut-off protection. If the thermal cut-off protection trips, switch off the

power, switch off the circuit breaker. The unit should reset automatically after 10-30 minutes. If

the thermal cut-off protection trips again, consult a certified/licensed electrician to determine the

reason for overheating.

Problem

Probable Cause

Overheat protection has temporarily

deactivated the heater.

Unit is not heating.

Breaker/Fuse has been tripped.

Check & ensure there are no combustible

materials within 0.9 meters (3 feet) surrounding

the heater.

A drop of oil fell on the heating coil during the

The heater is

manufacturing process. It will quickly evaporate

producing a burning

and should not occur again.

smell.

Ensure a minimum clearance of 1 foot (0.3 m)

from both sides and rear of heater to any

adjacent surface/wall.

PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER YOURSELF. DOING SO COULD

CAUSE DAMAGE TO THE HEATER OR PERSONAL INJURY.

TROUBLE SHOOTING

Solution

Turn the heater OFF. Switch off the circuit

breaker. Wait 10-30 minutes before turning on

the heater.

Check your electrical box to confirm the

breaker has not been blown. This may occur if

the receptacle is shared with other high

consumption appliances.

Remove any combustible items from the vicinity

of the heater.

Ensure room in which heater is situated is well

ventilated.

Reposition the heater so there is enough space

between the heater and any adjacent

surface/wall.