Electrolux 725239 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Frigorifero Electrolux 725239. Electrolux 725239 18. Vertical refrigerators
Anche per Electrolux 725239: Manuale (34 pagine)

Stampa la pagina

The continuous cycle ends:

– when the button is pressed (the message cce=end

appears);

– when the minimum foreseen temperature is reached;

– when the maximum duration (time 1h) is reached;

– when the instrument is switched off.

• Set button

Press for more than 1 second to display and/or set the

setpoint. To increase or decrease the values use the

buttons

. To confirm the new value, press the Set

button

• Defrost button

IMPORTANT

Do not use mechanical devices or other means

to speed up the defrost process, unless recom-

mended by the manufacturer.

Do not damage the circuit.

The appliance has an automatic defrost function. A manual

defrost cycle can be started by keeping the button pressed

for at least 5 seconds (the display shows the message dFb ).

This function is signalled by lighting up of the defrost icon

. Defrost is with forced ventilation only for refrigerated

models with compartment set point higher than or equal to

"+2".

Defrost can be stopped manually by pressing the button for

a few seconds (the display shows the message dFE).

Defrost cannot be activated in the continuous cycle

programming phase. If the continuous cycle is activated

and the button is pressed, defrost will be carried out at the

end.

• Programme selection button

It is used in the HISTORY function (see the following

paragraph). Pressing this button also brings up the

Technical Menu, which cannot be modified.

• History button

Records the temperature every 24 hours from activation, for

a total of 62 saves.

Records high/low temperature alarms. The first press of the

button

brings up the list of daily recorded values (t00=

current day; t01, t02, t03, etc.=recording days going back).

Use the buttons

previous days.

Press the Set button

temperature of that period; to return to the list of stored

values press the button

Press the button

for a few seconds to exit the History

function. At least 24 hours must pass after installation of the

appliance before the first temperature can be recorded.

Keeping the button

the previous recordings.

• Light Button

Present in all full door and glass door freezer models and glass

door refrigerated models, its purpose is to switch on the inside

light.

G.3

Signalling icons

The digital thermostat has the following signalling ICONS:

to display the temperatures of

to display the recorded

pressed for a few seconds resets

lit up

This icon indicates compressor

activation.

lit up

This icon indicates the manual defrost

function in progress.

lit up

This icon indicates activation of com-

partment fans (if present).

lit up

This icon indicates activation of auxiliary

users (if present).

lit up

This icon indicates that a service alarm

has occurred during appliance

operation.

lit up

This icon indicates that the History

function is ON.

G.4

Alarms

• Compartment high temperature alarm

This icon lights up and an audible alarm sounds when the

compartment temperature exceeds the set maximum value.

The alarm ceases when the temperature returns to the Set

Point. A timer, which counts the alarm duration time until it is

silenced, is also activated. Pressing the History button

displays the code HI and then in sequence, pressing the

button

the number of hours since the alarm occurred.

To deactivate the icon, briefly press on it.

• Compartment low temperature alarm

This icon lights up and an audible alarm is activated when

the compartment temperature exceeds the set minimum

value. The alarm ceases when the temperature returns to

the Set Point. A timer, which counts the alarm duration time

until it is silenced, is also activated. Pressing the History

button displays the code LO and then in sequence, pressing

the button

, the number of days since the alarm

occurred. To deactivate the icon, briefly press on it.

• Door open alarm

The icon lights up when the door is opened. After the max.

door opening time the icon stays on fixed and the buzzer is

activated. The alarm ceases when the door is closed.

• Service Alarm

The message is signalled by lighting up of the icon.

Signalling also occurs with the respective code appearing

on the display and the activation of an audible alarm (see

section I.2 Troubleshooting).

G.4.1

Alarms silencing

Alarms are silenced by pressing on the lit icon. The value

indicated on the display is also automatically reset.