Electrolux C40/110 Manuale - Pagina 8

Sfoglia online o scarica il pdf Manuale per Frigorifero Electrolux C40/110. Electrolux C40/110 29.

5. Keep rotary switch (B) depressed for another 10-15 seconds, then release.

6. Check the inspection glass to see whether a flame is burning.

7. Repeat the entire process if the flame has gone out.

8. Use rotary switch (B) to regulate the temperature in the main refrigerator compartment.

2. Automatic ignition

4. Keep rotary switch "B" depressed for another 10-15 seconds, then release.

5. If the flame goes out, the ignition system will repeat the ignition process automatically.

6. Adjust the temperature in the main refrigerator compartment using rotary switch "B".

All refrigerators, whether manual or automatic ignition, are equipped with

automatic flame protection, which automatically cuts off the supply of gas

approximately 30 seconds after the flame goes out.

When using for the first time, and after changing the gas cylinder, the gas

pipes may contain air. By means of brief operation of the refrigerator and

any other gas appliances (e.g. cookers), air is removed from the gas pipes.

The gas will then ignite without delay.

5.3

Switching off

1. Set energy selector switch (A) to

position "0" (OFF). The appliance is

now fully switched off.

Switching off gas operation

If the refrigerator is to be taken out of service for an

extended period of time, the on-board shut-off valve and

the cylinder valve must be closed.

1. Set energy

selector switch (A)

to Gas.

3. The ignition process is activated automatically,

accompanied by a ticking sound; the indicator

lamp (D) will flash. Upon successful ignition, the

sound and the flashing will stop.

2. Press and hold

2. Secure the door open by

means of the door stop.

The door will be slightly

ajar; this is to prevent

mould from forming inside

the appliance.

rotary switch (B).