Bosch 800 Series Manuale di istruzioni per l'installazione - Pagina 10

Stampa la pagina

Bosch 800 Series Manuale di istruzioni per l'installazione

To connect the hot water supply:

1. Assemble the water supply adaptor fitting (Part

F) from the parts bag onto the dishwasher water

supply hose. This connection does not require

Teflon brand tape.

2. Pass the dishwasher water supply line with

attached adaptor through the opening toward the

water shut off valve. Take care not to allow the

hose to kink or twist behind the dishwasher.

3. Connect the dishwasher water supply line with

adaptor to the water shut off valve. You will need

to use an approved dishwasher water supply line

with the correct fittings for this connection.

Always use the appropriate seal when making

plumbing connections.

NOTE: The end of the dishwasher water inlet hose is

heavy and will need to be supported. It is best to lay

the end on the cabinet floor as shown in Figure 8.

4. After all connections are made, turn on the hot

water and check for leaks.

Drain Connections

The dishwasher drain hose may be connected to

the house-hold or field drain plumbing in one of four

ways. You will need an 1

to pass the drain hose through the cabinet. You

may use the previously removed drain hose clip to

hold the drain hose as shown in Figure 9 if needed.

Figure 8

1/4

" diameter hole in order

Figure 9

1. Directly

under

connection, as shown in Figure 10.

2. Directly

connection, as shown in Figure 11.

3. To the under sink dishwasher drain connection

through an air gap, as shown in Figure 12.

4. To a disposer dishwasher drain connection

through an air gap, as shown on Figure 13.

IMPORTANT NOTES:

If local ordinance require an air gap, install it

according to the manufacturer's instructions.

If the dishwasher drain hose is to be connected

to a disposer dishwasher drain connection,

remove the plug from the disposer's dishwasher

drain connection.

The dishwasher drain hose must have one place

along its length that is securely attached 20 (508

mm) above the cabinet floor.

The drain hose length can be extended if

necessary. The maximum length of the drain

hose, including the hose leading to the air gap, is

150 (3800 mm).

Figure 10

Figure 12

the

sink

dishwasher

disposer

dishwasher

Figure 11

Figure 13

drain