Bosch ASCENTA SHX6AP Manuale d'uso e manutenzione - Pagina 13
Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Lavastoviglie Bosch ASCENTA SHX6AP. Bosch ASCENTA SHX6AP 21. Bosch ascenta models dishwashers use & care manual
Anche per Bosch ASCENTA SHX6AP: Manuale d'uso e manutenzione (21 pagine), Manuale d'uso e manutenzione (26 pagine)
Stampa la pagina
OPERATING
THE:
SHE4AMO
SHE4AM1
WARNING
You could be seriously
scalded
if you
allow
hot water
to splash
out of the dishwasher.
OPEN THE DOOR CAREFULLY
during
any
wash
or rinse cycle.
Do not fully
open
the door
until water
noises
have stopped.
To Start
Unit:
• Door must be closed.
Press the "ON/OFF"
button
to turn the unit
on.
One of the Wash Cycle Indicator
Lights will be flashing
to show
you are in the Wash Cycle selection
mode.
Press the "<" or ">" button
to select the desired
wash cycle.
If desired
select
the "HALF LOAD" or DELAY START" features
at
this point.
If you would
like to delay the start time of the dishwasher
press
the "DELAY" button
until
the desired
delay time
(3/6/9
hrs.)
shows on the Indicator
Lights.
In addition
to your
Wash Cycle selection,
for small
loads
of
lightly
soiled
dishes
press the "HALF LOAD" button.
This will
save energy
and water
(SHE4AMI#
only).
Press the "START" button
to begin the cycle (Wash Cycle Indica-
tor Light
will stop flashing
and the "Active"
Indicator
Light
will
illuminate)
Note: Rinse Agent Indicator Light will be illuminated if the unit needs
Rinse Agent.
Child
Lock
• After
pressing
the "START" button
you can activate
the Child Lock
feature.
• Press and hold down the'<"
button
until Child Lock Indicator
Light
illuminates
(Light
goes out when
button
is released).
• Now any button
you press (except
ON/OFF) will not function
and
the Child Lock Indicator
Light
illuminates
when
pressing.
• To deactivate,
press and hold the "<" button
until the Child Lock
Indicator
Light goes out.
To Cancel
the
Cycle:
• Press and hold the"START/RESET"
button
until the "Active"
Indica-
tor Light goes out.
• Wait for about
1 minute
for the dishwasher
to drain.
• Press the "ON/OFF"
button.
• You are now ready to start a new
cycle
Note: You cannot cancel a cycle with the
Child Lock feature activated.
Setting
Options
(Rinse
Agent
Amount
/ Extra
Dry Heat Activa-
tion)
• Door must be closed. Pressthe "ONI
OFF" button to turn the unit on.
• One of the Wash Cycle Indicator
Lights
will be flashing
to show you are in the
Wash Cycle selection
mode.
•
To enter
the Options
Setup
Mode,
press and hold
down
the ">" button,
then
press and release
the "START RE-
SET" button,
then
release the ">" button.
• The"Clean" Indicator Light and at least one addition Indicator Light
will be flashing to show you are in the Options Setup Mode.
• Pressthe ">" button to select the option you would like to adjust
o If the "CLEAN" and "RINSEAGENT" Indicator Lights are flashing
you are ready to set the amount of Rinse Agent the unit will
dispense.
o If the "CLEAN" and "SANITIZED" Indicator Lights are flashing you
are ready to turn your Extra Dry Heat option on/off.
To Set the Amount
of Rinse Agent
Dispensed
NOTE: If your glasses have spots you need more Rinse Agent. If your
glasses have streaks you need less Rinse Agent.
• With the "CLEAN" and "RINSEAGENT" Indicator Lights flashing.
• Press the "<" button to change the amount of Rinse Agent Dis-
pensed.
• As you press the "<" button you will notice the Wash Cycle Indica-
tor Lights illuminating
o If none of the Wash Cycle Indicator Lights are illuminated,
the
Rinse Agent Dispenser is turned off.
o If one of the Wash Cycle Indicator Lights are illuminated,
the
Rinse Agent Dispenser is set to deliver the lowest charge of
Rinse Agent.
o If two of the Wash Cycle Indicator Lights are illuminated,
the
Rinse Agent Dispenser is set to deliver a medium charge of
Rinse Agent.
o If three of the Wash Cycle Indicator Lights are illuminated,
the
Rinse Agent Dispenser is set to deliver the largest charge of
Rinse Agent.
• Press"START"to save your settings.
To Turn the Extra Dry Heat On or Off
• With the "CLEAN" and "SANTITIZED" Indicator Lights flashing.
• Pressthe "<" button to change the Extra Dry Heat setting.
• As you press the "<" button you will notice the Wash Cycle Indica-
tor Lights illuminating
o If none of the Wash Cycle Indicator Lights are illuminated,
the
Extra Dry Heat option is turned off.
o If one of the Wash Cycle Indicator Lights are illuminated,
the
Extra Dry Heat is turned on.
• Press"START"to save your settings.
13