Bosch DISHWASHER Manuale di istruzioni per l'uso - Pagina 16

Stampa la pagina

Bosch DISHWASHER Manuale di istruzioni per l'uso

Washing dishes

Programme selection

The most appropriate programme can be

identified by comparing the type of

crockery, cutlery, etc., as well as the

amount and condition of food remains,

with the details contained in the

programme overview.

The corresponding programme sequence,

duration and consumption details are

shown in the bottom half of the overview.

For example:

For a mixture of various types of crockery

and utensils with plenty of food remains

that are not stuck on fast, use the

Auto

programme.

Reduce costs!

If only a small number of

dishes have been loaded into

the dishwasher, selecting a

programme that operates at

the next lowest temperature

will usually suffice.

Programme data

The stated programme data are based on

standard operating conditions. The values

can vary considerably according to:

different amounts of dishes

temperature of mains water supply

pressure of mains water supply

ambient temperature

fluctuations in mains voltage

machine-related factors (e.g.

temperature, water volume, ...).

Energy and water consumption is reduced

by up to 1/4 when dishes are washed in

the upper basket only.

Water consumption values are based on a

water hardness setting of 4.

Aquasensor *

* on applicable models

The Aquasensor is an optical measuring

device with which the cloudiness of the

water in the dishwasher is measured. A

photoelectric sensor is used to detect the

degree of soiling in the water, caused by

dissolved food particles such as egg, fat

and rolled oats, etc.

The Aquasensor functions during all

programmes that include a pre-rinse cycle.

If the water is still "clean" at the end of the

pre-rinse cycle, then the same water is

used for the following wash cycle. If the

water is dirty, it is pumped out of the

dishwasher and replaced by fresh water.

The effect is to reduce water consumption

by approx. 5 litres when the dishes are

only "slightly" dirty.

Switching the dishwasher ON

Turn on the tap.

Set main switch

Indicators light up according to the last

programme that was selected.

This same programme will run again if

no other programme button

pressed.

For appliances with top basket feature:

If only the top basket is loaded, press

the top-basket button

The numerical display

expected duration of the programme.

The programme starts automatically.

End of programme

The programme has ended when a figure

appears in the numerical display

to ON.

shows the