Bosch SB Series Manuale di istruzioni - Pagina 34

Stampa la pagina

Fault, what to do?

Fault

Initial or existing,

irreversible clouding

of glass.

Rust spots on the cutlery.

The appliance does not

start.

Programme starts

automatically.

Appliance cannot be set

(hardness, final rinse, ...).

The door is difficult

to open.

Door cannot be closed.

Cause

Glasses not dishwasher-proof,

only suitable for dishwasher.

Cutlery not adequately rust-

resistant. Knife blades are

frequently more severely

affected.

Cutlery will also rust if rusting

parts are rinsed at the same time

(pan handles, damaged utensil

baskets, etc.).

Salt content in the rinsing water

too high, as salt dispenser lock

not fastened firmly or salt was

spilled while being refilled.

The mains fuse has tripped.

Power cord not inserted.

The appliance door has not been

shut properly.

Pause function is active. *

You did not wait until programme

ended.

Appliance is in the programme.

Appliance can be set at the start

of the programme only.

Child-proof lock is activated.

Door lock has been activated.

Door cannot be closed due to

installation.

Remedial action

Use dishwasher-proof glasses.

Avoid long steam phase (standing time after

wash cycle ends).

Use wash cycle at lower temperature.

Set water softening system according to the

water hardness (if required one setting

lower).

Use detergent with glass protection

component.

Use corrosion-resistant cutlery.

Do not wash rusting parts.

Fasten salt dispenser lock firmly or remove

spilled salt.

Check mains fuse.

Ensure that the power cord is plugged all

the way into the back of the appliance and

into the socket. Check that the socket

functions.

Close the door.

Press the Start button @. *

Perform reset.

(See Terminating the programme).

Perform reset (see Terminating

the programme) and set the appliance

according to the instructions for use.

Deactivate childproof lock. (See instructions

for use at the back)

Close door with increased force.

Check appliance installation: Door or

attached parts must close without

obstruction.