Airspeed FM-25 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore per strumenti musicali Airspeed FM-25. Airspeed FM-25 17.

Section 1

This section is where you will find the ¼" input jack for connecting your guitar as well as the CLEAN

channel controls.

VOL – Use this control to raise or lower the volume level of the channel.

GAIN – Use this control to raise the gain on the CLEAN channel. For a "clean" tone, set the gain control

below the midpoint (for clarity, the "12:00" position, in reference to a clock). If you are seeking more of

an overdriven tone, set the gain control further to the right of the midpoint (that is, after "12:00").

REVERB – The reverb control allows you to increase the "echo", or reverb, by turning it clockwise as

indicated by the graphic.

TREBLE, MID & BASS – Use these controls to shape your sound. Start by setting the controls at the

midpoint for all three controls, and then experiment with making minor adjustments to each control,

progressively, until the preferred sound is achieved.

Section 2

This switch allows you to choose between the CLEAN channel and the CRUNCH channel. Use this switch

ONLY if the MASTERswitch™ 7 footswitch is NOT connected to the amp.

Section 3

This section is where you will find the CRUNCH channel controls.

VOL – Use this control to raise or lower the volume level of the channel.

GAIN – Use this control to raise the gain on the CRUNCH channel. For a "clean" tone, set the gain control

below the 12:00 (midpoint) position. If you want more of an overdriven tone, set the gain control after

the 12:00 position.

BOOST – This control allows you to set the level of boost (when the boost channel is activated by the

footswitch) and is based on the CRUNCH gain control setting.

P a g e

| 4

Airspeed FM-50 Owner's Manual, Ver 2.0