Dragonfly 92-145 Manuale di installazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di installazione per Schermo di proiezione Dragonfly 92-145. Dragonfly 92-145 4. Fixed projection screens

Stampa la pagina

DF-SL-92-145 Installation Manual

Dragonfly Fixed Screen Assembly Instructions

Step 1. Unpack the Screen

A. Lay out all the parts on a clean, flat surface.

B. To avoid stains or damage, do not unpack the screen material at this time.

Package Contents

Screen Frame

(2 short, 2 long)

5x40mm Phillips

Head Screws (8)

Step 2. Install the Snap Lugs in the Frame

The snap lugs hold the screen material in place on the frame. Slide one lug into place at each arrow decal on

the frame. Two spare lugs are included; do not install them unless needed.

Step 3. Assemble the Frame

A carpenter's square is very helpful for this step.

A. Place all of the frame tubes face down on a flat, clean work surface and line up the ends to form the shape

of the finished screen.

B. Loosen the screws on the L-bracket assemblies, then carefully slip the brackets into the aluminum frame

channel.

C. Work around the frame several times, using the square to align the frame corners and tightening the

screws a little each time.

L-Bracket

Top Frame

Side Frame

Tensioning Rod

(2 short, 2 long)

Concrete

Anchors (8)

Screen Size

84"

92"

100"

106"

Tethered Mounting

Bracket (1)

Snap Lugs

(see below, +2 extra)

Lugs Used

Screen Size

110"

120"

133"

145"

Screen Material

(1)

L Bracket

Assembly (4)

Lugs Used