Advanced Elements AdvancedFrame Expedition AE1009 Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Barca Advanced Elements AdvancedFrame Expedition AE1009. Advanced Elements AdvancedFrame Expedition AE1009 20. 1 person kayak
Stampa la pagina
3.3 Inflating
IMPORTANT: Before inflating, check to be sure that the kayak is completely assembled. Inflate
your kayak in the following order. Failure to follow these instructions may cause damage to
your kayak. Do not over inflate.
1. Partially inflate chamber 1 until the kayak begins to fill out or appears to be half way inflated
then close cap. Check to be sure the valve is in the inflate position (See Figure 1).
2. Inflate chamber 2 until the AdvancedFrame™ tube is firm to touch (2.0 psi ONLY).
3. Inflate chamber 3 "floor" (using appropriate fitting). Twist valve open to inflate and twist
closed when complete (See Figure 2). Fill until firm. Do Not Over-Inflate! (1.0 psi ONLY)
4. Inflate Coaming chambers 4 & 5 until firm. Never over-inflate! (1.0 psi ONLY)
5. Inflate chamber 6 & 7/8 & 9 for desired deck lift. Never over-inflate! (1.0 psi ONLY)
6. Make sure all valves are closed tightly and properly.
7. Finally, Insert Plastic Bow and Stern forms into pocket on bow and stern (Figure 3).
AdvancedFrame Expedition™ Inflatable Kayak Owner's Manual
Diagram of Inflation Chambers
Figure 3. Plastic Bow and Stern Insert