Bosch 8 Series Manuale di istruzioni per l'installazione e l'uso - Pagina 17

Appliance width 90 cm:

You must also screw the appliance to the wall-hanging

cupboards either side of it.

Changing the filter pull-out's limit stop

On some versions of the appliance, the limit stop for the

filter pull-out can be changed. Spacers are included

with these appliances in order to position the

appliance's handle strip flush with the fitted unit.

Pull the filter pull-out towards you.

Shorten the spacer to the required dimension and

insert it into the slot specified.

Connecting the pipes

If an aluminium pipe is used, smooth the area

Note:

where it is to be connected before you connect it.

Exhaust air pipe, dia. 150 mm (recommended size)

Fit the exhaust air pipe directly to the air-pipe connector

and seal the joint.

Exhaust air pipe, dia. 120 mm

Fit the reducing connector directly to the air-pipe

connector.

Attach the exhaust air pipe to the reducing

connector.

Seal both joints appropriately.

Removing the appliance

Disconnect the electrical connection.

Disconnect the pipes.

Remove the metal grease filter.

Remove the protective caps from the fastening

elements.

Remove the appliance; see section entitled

"Removing the appliance".

Installation en