Draper Acumen Recharge V Istruzioni Installazione e funzionamento - Pagina 7

Sfoglia online o scarica il pdf Istruzioni Installazione e funzionamento per Schermo di proiezione Draper Acumen Recharge V. Draper Acumen Recharge V 12. Battery operated electric projection screen

Stampa la pagina

Acumen

Recharge E & V

™

Section 8- Set Motor Limits

Move screen to desired

highest or lowest

position by pressing

UP or DOWN buttons

on controller.

Important: Cycle screen up and down

prior to setting limits to settle fabric.

Section 8.1 - Adjusting Upper Limit

Hold UP and STOP on controller.

For 10-15 seconds screen will time

out on remote: continue holding.

SEC S

Motor Response:

Approx.

10-15

sec

Section 8.2 - Adjusting Lower Limit

Hold DOWN and STOP on controller.

For 10-15 seconds screen will time

out on remote: continue holding.

Motor Response:

SEC S

Approx.

10-15

sec

Section 8.3 - Disable limit setting function of remote

SEC S

To save upper limit,

hold both UP and STOP.

SEC S

Move screen to desired

position by pressing

UP or DOWN button.

SEC S

Move screen to desired

position by pressing

UP or DOWN button.

SEC S

Important: It is still possible to

add/delete channels and perform

P2 functions while lock function

is enabled.

SEC S

Important: This mode is intended

SEC S

to be used after all screen

programming is completed.

Locked Mode will prevent

accidental or unintended

changing of limits.

To save lower limit,

hold DOWN and STOP.

Motor Response:

Approx.

SEC S

To save upper limit,

hold UP and STOP.

SEC S

Motor Response:

Approx.

SEC S

To save lower limit,

hold DOWN and STOP.

Motor Response:

Approx.

SEC S

Response

LED solid on when locked

LED blinking when unlocked

page 7 of 12

Important: After

setting limits, motor

will automatically

exit from initial

programming mode.

SEC S

Pressing right button for 1

second or less will display

current mode

SEC S