Bosch Programme Table Manuale di istruzioni - Pagina 7

Stampa la pagina

Bosch Programme Table Manuale di istruzioni

Technical data

Dimensions (DxWxH)

Weight

Max. capacity

Condensation container

Connection voltage

Connected load

Fuse protection

Ambient temperature

Product number/

Production number

You can find the rating plate on the back of the dryer.

Consumption rates

Cottons 8 kg

Cupboard Dry*

Iron Dry*

Easy-Care 3.5 kg

Cupboard Dry*

*Test program according to DIN EN 61121.

**The values may differ from the those specified depending on the type of fabric, mixture of

laundry to be dried, residual moisture in the fabric and loading capacity.

Drum interior light

(depending on model)

The drum is illuminated after the door is opened or closed, and also after the programme is

started. It goes out automatically. Replacing the bulb

Optional accessories

Connection fittings for condensation outlet

WTZ

The condensation is conveyed directly via a hose.

1110

Washer-dryer stack connection set

WTZ

The dryer can be placed on top of a suitable washing machine with the same width and depth

11310

to save space. This connection set must always be used to secure the dryer to the washing

machine. With pull-out worktop: WTZ 11300.

Installation underneath the worktop

WTZ

10290

Risk of electric shock!

Instead of the appliance covering plate, you must have a metal cover fitted by an expert.

60 x 60 x 85 cm (height adjustable)

approximately 45 kg

8 kg

4.2 l

see appliance rating plate

These are guide values determined under standard

conditions.

Fluctuations up to 10% are possible.

Spin speed in rpm

Drying time

(residual moisture)

in min.**

13 A

1400 (approx. 50 %)

105

1000 (approx. 60 %)

122

800

(approx. 70 %)

139

1400 (approx. 50 %)

1000 (approx. 60 %)

100

800

(approx. 70 %)

117

1000

800

(approx. 40 %)

600

(approx. 50 %)

(bulb E14, 25 W)

Page 10.

(order from the after-sales service using the order number)

What to do if ...

If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales

service. We will always find an appropriate solution and will avoid unnecessary visits by

engineers. Trust the expertise of the manufacturer and rest assured that the repair will be

carried out by trained service technicians using original spare parts. The contact details of your

local after-sales service can be found in the enclosed after-sales service directory, or by

calling one of these numbers:

– GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.

A call set-up fee of up to 6 pence may apply.)

– IE 01450 2655

When contacting the after-sales service, please quote the appliance's product number (E no.)

and production number (FD) (see the inside of the door).

Set the programme selector to Off and remove the appliance plug from the socket.

The

Start/Stop indicator lamp

does not light up.

Container

The

Start/Stop indicator lights are

flashing.

Filter

The

and

Energy

indicator lights are flashing.

consumption

Dryer does not start.

in kWh**

13 A

3.74

Water is running out.

4.49

5.17

The door opens by itself.

2.24

Creasing.

3.44

3.86

1.05

Drying result is not satisfactory

(laundry feels too damp).

1.35

1.65

Drying time too long.

The humidity in the room

increases significantly.

Mains failure.

One or more indicator lights for

programme status are flashing.

The interior light is not working

(depending on model).

Mains plug plugged in?

Programme selected?

Empty the condensation container.

and

If featured, check hose for condensation outlet.

Clean the fluff filter and/or air cooler under running water

Start/Stop

Page 4/6.

Start/Stop button selected?

Door closed?

Programme set?

Ambient temperature greater than 5 °C?

Align dryer horizontally.

Clean air cooler seal.

Push the door closed until you hear it engage.

Laundry load exceeded?

Remove articles of clothing immediately after

the end of the programme, hang up and pull into shape.

Unsuitable programme selected

Warm laundry feels damper than it actually is.

The selected programme does not suit the load. Use another

drying programme or, in addition, select the time programme

Page 7.

Use fine adjustment for the drying result

Fine layer of limescale on the humidity sensors

Clean the humidity sensors

Programme termination, e.g. tank full, mains power supply failure,

door open or maximum drying time reached.

Rinse the fluff filters under running water

Insufficient supply of air

Air inlet possibly blocked

Ambient temperature higher than 35 °C

Make sure the room is sufficiently ventilated.

Remove laundry from the dryer immediately and spread out.

This allows the heat to dissipate.

Clean filter and air cooler

Check installation conditions

Switch off, leave to cool down, switch on again, restart

programme.

Pull out the appliance plug, remove the cover cap in the interior

above the door (use Torx 20 screw driver) and replace the bulb.

Close the cover cap.

Never operate the dryer without a cover cap.

Page 7.

Page 5/6.

Page 6.

Page 4.

ensure that air can circulate.

Clear inlet

Page 8.

ventilate the room.

Page 4/6.

Page 8.