Draper Luma 2 Installazione e funzionamento
Sfoglia online o scarica il pdf Installazione e funzionamento per Schermo di proiezione Draper Luma 2. Draper Luma 2 4. Heavy duty spring roller operated projection screen
Anche per Draper Luma 2: Specifiche tecniche (1 pagine), Opuscolo (16 pagine)
Stampa la pagina
Luma 2
Heavy duty spring roller operated projection screen
Overview - Components
Section 1 - Removing Shipping Brackets
CAUTION: Shipping support brackets must be removed from bracket
clamps at each end of dowel before initial operation, and before
screen is operated in UP direction.
CAUTION: Raise and lower viewing surface several times to confirm
satisfactory operation.
Read and understand all warnings
Contents
Overview - Components ...............................................................................................1
Section 1 - Removing Shipping Brackets..................................................................1
PLEASE READ - Safety Information ............................................................................2
1. Remove
1. Remove fasteners
1. Remove fasteners
from
from bracket clamps.
from bracket clamps.
Dowel
4. Retighten dowel
4. Retighten dowel
4. Retighten dowel
CAUTION
(Page 2 of this document)
Section 2 - Operation....................................................................................................2
Section 3 - Hanging Screen and Methods of Installation .......................................3
Section 4 - Dimensions ................................................................................................4
INSTRUCTIONS
INSTALLATION & OPERATION
fasteners
bracket clamps.
2. Run the screen
2. Run the screen
2. Run the screen
endcap screws.
endcap screws.
endcap screws.
before beginning installation.
If you have any difficulties installing or servicing your
Luma 2 projection screen, call your dealer or Draper, Inc.
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2022 All Rights Reserved
TOOLS
REQUIRED
PENCIL
POWER DRILL
CAUTION
Read and
understand all
warnings
(Page 2)
TAPE MEASURE
before beginning
installation.
PERSONNEL
REQUIRED
LEVEL
HARDWARE
Figure 1
DOWN to expose
DOWN to expose
DOWN to expose
dowel screws.
dowel screws.
dowel screws.
3. Loosen screws
and remove
shipping bracket.
|
FORM: Luma2_Inst22
(by others)