Draper 400W Istruzioni per - Pagina 13

Sfoglia online o scarica il pdf Istruzioni per per Utensile elettrico Draper 400W. Draper 400W 20.

BASIC JIGSAW OPERATION

NOTE: Remove the plug from the socket before

carrying out adjustment, servicing or maintenance.

9.2 BEVEL CUTS - FIG. 3

For making bevel cuts, the base can be adjusted up

to 45° in either direction.

i. Loosen the 3mm hex. socket bolts

ii. Slide the base plate

disengage the current setting (90°).

iii. Tilt the base to the required angle, then

push backwards to engage pre-set bevel

angles.

iv. Tighten the 3mm hex. socket bolts

9.3 DUST & SWARF - FIG. 4

Inhalation of dust particles can be detrimental to

health. The dust outlet must be connected with a

dust extraction machine.

NOTE: Due to the outlet diameter, a size

adaptation may be necessary.

All wood dust (including dust from composites like

chipboards and fibre boards etc.) is hazardous to

health: it can affect the nose, the respiratory

system and the skin. For example MDF (medium

density fibreboard) which contains formaldehyde

is a known carcinogen. In addition to the above

measures a correctly fitted dust mask, suitable for

the activity and in accordance to the relevant

standard, must be worn. For work activities

involving exposure to fine wood dust, a mask

rated to at least FFP2 should be used.

Swarf produced by metal cutting is extremely

sharp. Take precautions when clearing swarf. The

burr left on the cut is also sharp and should be

removed with a suitable tool.

forwards to

FIG.3

FIG.4