Draper 83652 Manuale di istruzioni - Pagina 11

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Draper 83652. Draper 83652 16. 135w 230v rotary multi-tool kit with flexible drive shaft
Anche per Draper 83652: Manuale di istruzioni (16 pagine)

Stampa la pagina

BASIC MULTI-TOOL OPERATIONS

8.1

SWITCHING ON AND OFF - FIG. 1

Press switch

into the 'I' position. This will start the

machine. Press switch to the 'O' position - this will stop

the machine.

Using the variable speed dial

the speed of the collet chuck:

Position 1 - SLOW

Position 3 - MEDIUM

Position 6 - FAST

Select the correct speed for the work and type of bit you

are using.

8.2

APPLICATIONS

Your multi-tool can be used for drilling, grinding,

polishing, milling and brushing. Other jobs like

engraving, cutting and removing rust are also possible. It

can be used on most wood, metal, glass and ceramics.

It is a good idea to practice on a scrap piece of material.

Best results are achieved by an even speed and pressure

(not too hard). Use lower speeds for larger tools and

higher speeds for smaller tools.

WARNING: Excessive force on this machine will cause the

motor to overheat and fail. This is not covered by the

guarantee.

8.3

HOLDING THE TOOL - FIGS. 2 - 3

For jobs such as milling or engraving where precision is

required, hold the multi-tool like a pen.

Care should be taken not to fully cover exhaust vents.

Covering the vents will cause the machine to overheat

and fail.

For heavier work like cutting or grinding hold the

multi-tool in the palm of your hand.

8.4

CHANGING BITS - FIG. 4

NOTE: Remove the plug from the socket before carrying

out adjustment, servicing or maintenance.

Choose from the five collets provided, the appropriate

size for the bit shank. If the size is not known, insert the

bit into the collet. The collet which offers a machine fit to

the bit is the correct one to use. Do not force the bit into

a collet.

Press spindle locking button

rotating. Using the spanner

Place the collet into the spindle and loosely replace the

nut.

NOTE: Do not over tighten the collet nut

will enable you to alter

to stop the spindle from

, loosen the collet nut

FIG.1

FIG.2

FIG.3

FIG.4