Draper BR15A Manuale di istruzioni - Pagina 6
Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Draper BR15A. Draper BR15A 20. 1600w 115v 15kg
Stampa la pagina
5.
HEALTH & SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE
WARNING:
Please read the following instructions carefully, failure to do so could lead to serious personal injury.
When using electric tools, basic safety precautions, including the following, should always be followed to
reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this
product and save these instructions.
IMPORTANT:
Draper Tools Limited recommends that this machine should not be modified or used for any application
other than that for which it was designed. If you are unsure of its relative applications do not hesitate to
contact us in writing and we will advise you.
1.
KNOW YOUR POWER TOOL: Read and understand the owner's manual and labels affixed to the
tool. Learn its application and limitations as well as the specific potential hazards peculiar to this
tool.
2.
KEEP WORK AREA CLEAN: Cluttered areas and benches invite accidents. Floors must not be slippery
due to oil or sawdust.
3.
AVOID DANGEROUS ENVIRONMENTS: Do not use power tools in damp or wet locations, or expose
them to rain. Keep work area well lit. Provide adequate space surrounding the work area. Do not
use in environments with a potentially explosive atmosphere.
4.
KEEP CHILDREN AWAY: All visitors should be kept a safe distance from work area.
5.
STORED TOOLS: When not being used, all tools should be stored in a dry, locked cupboard and out
of the reach of children.
6.
WEAR PROPER CLOTHING: Do not wear loose clothing, neckties or jewellery (rings, wristwatches) to
catch in moving parts. NONSLIP footwear is recommended. Wear protective hair covering to contain
long hair. Roll long sleeves above the elbow.
7.
USE SAFETY GOGGLES (Head Protection): Wear CE approved safety goggles at all times. Normal
spectacles only have impact resistant lenses, they are NOT safety glasses. Also, use face or dust mask
if application is dusty and ear protectors (plugs or muffs) during extended periods of operation.
8.
NOISE LEVELS: Some types of machines may have high noise levels when working. In such cases ear
protection must be worn.
9.
VIBRATION LEVELS: Hand held power tools produce different vibration levels. You should always
refer to the specifications and relevant Health and Safety guide.
10. DUST EXTRACTION: If your tool is fitted with a dust extraction fitting, always ensure that it is
connected and being used with a dust extractor. Vacuum cleaners can be used if suitable for the
material being extracted.
11. PROTECT YOURSELF FROM ELECTRIC SHOCK: When working with power tools, avoid contact with
any earthed items (e.g. pipes, radiators, hobs and refrigerators, etc.). If you are using a power tool in
extreme conditions (e.g. high humidity or generating metal dust), always use an RCD (residual
current device) at the power socket.
12. STAY ALERT: Always watch what you are doing and use common sense. Do not operate a power
tool when you are tired or under the influence of alcohol or drugs.
13. WHEN WORKING OUT OF DOORS: Only use extension leads designed for that purpose.
14. ACCESS TO MAINS SOCKET: If a stationary machine is fitted with a moulded plug and cable, the
machine should not be positioned so that access to the mains socket is restricted.
15. DISCONNECT POWER TO THE TOOL: When not in use, before servicing and when changing
accessories such as cutters, etc.
16. AVOID ACCIDENTAL STARTING: Make sure the switch is in the OFF position before plugging the
machine into the power supply.
17. NEVER LEAVE MACHINE RUNNING UNATTENDED: Turn power off. Do not leave machine until it
comes to a complete stop.
18. DO NOT ABUSE THE CORD: Never carry the tool by the power cable or pull it from the socket. Keep
the power cable away from heat, oil and sharp edges. If the supply cord is damaged, it must be
replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid
hazard.
19. NEVER STAND ON TOOL: Serious injury could occur if the tool is tipped or if the cutting tool is
accidentally contacted. Do not store materials above or near the tool, so that it is necessary to stand
on the tool to reach them.
6