Draper PHD1050MAX Manuale di istruzioni - Pagina 11

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Draper PHD1050MAX. Draper PHD1050MAX 20. 230v 7kg sds max breaker

BASIC BREAKER OPERATIONS

Warning: Assembly must be completed prior to operating the machine.

Warning: Prior to beginning any work, carefully check the surface for the presence of electric

cable, gas or water pipes and other dangerous or damaging contents. If unsure do not

proceed.

Note: Remove the plug from the socket before carrying out adjustment, servicing or

maintenance.

9.1 TRIGGER SWITCH – FIG. 5

To activate the breaker, press the trigger

ii To operate the breaker for prolonged periods,

trigger

iii Press the switch lock button

iv Release the trigger

Note: To stop the breaker, press the trigger

9.2 SDS MAX SYSTEM – FIG. 6

The tool holder

without the need for a chuck key.

–

Pull collar

–

Insert the bit. It may be necessary to rotate the bit to

ensure it engages correctly.

–

Release the collar to lock the bit in place. Check by

pulling the bit to see if it's firmly seated.

Important: Always clean and lightly grease the tool shaft

before inserting into the chuck.

Take care that the dust protection cap is not damaged.

Allowing dust and debris inside the holder will cause

problems in the future.

To remove a bit, slide the collar

out the tool.

Warning: Bit will be hot after use.

and hold.

and lock button

clamps SDS Max bits and chisels

back.

once.

to the rear and pull

FIG.5

press and hold the

FIG.6