Draper 56369 Manuale - Pagina 12

Sfoglia online o scarica il pdf Manuale per Trapano Draper 56369. Draper 56369 20.

Stampa la pagina

BASIC IMPACT DRILL OPERATIONS

9.1 INSTALLING AND REMOVING

DRILL BITS – FIG.5

– Whilst gripping the base of the chuck (1), turn

the chuck end anti-clockwise to open up the

chuck jaws (1.1).

– Place the bit into the chuck as far as it will go*.

Again, grip the base of the chuck and turn the

chuck end clockwise so the jaws take up the

grip on the drill bit. Keep turning until the bit is

firmly and securely locked into the chuck.

– To remove the bit, repeat the first step as above

to open up the chuck.

*Make sure to grip the bit by the plain shank at the

bottom, gripping the flutes could lead to the bit

coming loose.

9.2 SWITCH OPERATION – FIGS.6 – 8

Trigger

– To activate the drill, press the trigger (2).

– To operate the drill for prolonged periods, press

and hold the trigger (2).

● Press the switch lock button (3) and hold.

● Release the trigger (2) and lock button (3).

● To stop the drill, press the trigger (2) once.

Note: The speed of the drill will vary depending on

the amount the trigger is pulled.

Variable speed dial

The amount the trigger can be pulled (and the

maximum speed of the drill) can be limited.

– Rotate the speed dial (4) clockwise to restrict

the drill speed.

Direction of rotation

This drill is equipped with a reverse function to help

remove jammed drill bits, etc.

– Move the selector (6) to the right to engage

reverse.

Rotary/percussion (hammer) selection

When drilling masonry, selecting the percussion

mode will improve performance.

– Ensure the chuck has stopped.

– Slide the selection switch (8) from the rotary

position

to the percussion (hammer)

setting.

FIG.5

(4)

(2)

FIG.6

(6)

Reverse

FIG.7

FIG.8

- 12 -

(1.1)

(1)

(3)

Forward

(8)