Draper RSAW900D Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Sega Draper RSAW900D. Draper RSAW900D 20.
Stampa la pagina
5.
HEALTH AND SAFETY INFORMATION
•
Cutting of pipes. Use caution when cutting hollow pipe and do not cut material where the
blade can enter the pipe when fully retracted, this can cause the blade to strike the inside of
the pipe causing the user to experience unexpected reaction forces.
•
Cutting into walls. Do not cut through walls or cavities without checking for hidden electrical
wires or water pipes etc.
•
Do not attempt to remove tool from work until the blade has completely stopped and allow
time for it to cool before touching the blade immediately after use.
•
Use clamps and vices to secure the workpiece where possible.
•
Cutting sheet materials. Do not cut material less than at least twice the pitch of the saw blade.
At least two teeth must be in contact with the work at all times.
•
Beware of foreign objects. When cutting pre-used wood, ensure all nails have been removed
beforehand. Nails will damage the wood saw blade.
•
Cooling agents. When cutting metals, always use a cooling agent i.e. cutting/soluble oil.
•
Do not attempt to saw small objects including those which cannot be properly secured. Always
hold the saw with both hands.
5.3 RESIDUAL RISK
Important note: Although the safety instructions and operating manuals for our tools contain extensive
instructions for safe working with power tools, every power tool involves a certain residual risk which
can not be completely excluded by safety mechanisms. Power tools must therefore always be
operated with caution!
5.4 CONNECTION TO THE POWER SUPPLY
Caution: Risk of electric shock. Do not open.
This appliance is supplied with a moulded 3 pin mains plug for your safety. The value of the fuse
fitted is marked on the pin face of the plug. Should the fuse need replacing, ensure the substitute
is of the correct rating, approved to BS1362 and ASTA or BSI Kite marked.
ASTA
BSI
The fuse cover is removable with a small plain slot screwdriver. Ensure the fuse cover is replaced
before attempting to connect the plug to an electrical outlet. If the cover is missing, a replacement
must be obtained or the plug replaced with a suitable type.
If a replacement plug is to be fitted this must be carried out by a qualified electrician.
The damaged or incomplete plug, when cut from the cable should be disabled to prevent
connection to a live electrical outlet.
This appliance is Class II
on the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this appliance. Follow all
the instructions supplied with the extension lead.
Double insulated
†
applied to the basic insulation to protect against electric shock in the event of failure of the basic
insulation.
IMPORTANT
If using an extension lead, follow the instructions that came with your lead regarding
maximum load while cable is wound. If in doubt, ensure that the entire cable is unwound.
Using a coiled extension lead will generate heat which could melt the lead and cause a fire.
and is designed for connection to a power supply matching that detailed
†
: This product requires no earth connection as supplementary insulation is
- 8 -