Draper 02519 Manuale - Pagina 8

Sfoglia online o scarica il pdf Manuale per Smerigliatrice Draper 02519. Draper 02519 20. 230v router
Anche per Draper 02519: Manuale (20 pagine)

HEALTH AND SAFETY INFORMATION

g) Secure the workpiece by means of the clamping equipment.

h) Before staring up, check that the bit is firmly positioned and secured into the collets.

i) The maximum indicated limit rotation speed of the milling bit must not be exceeded.

j) Routing must always be carried out against the direction of rotation (bit-rotation) of the bit.

k) The bit must be running at full speed before lowering into the workpiece.

l) When operating the machine, take great care and always hold the router handles firmly

with both hands. Always provide for a secure footing when working.

m) Beware of the reaction torque of the machine, particularly if the bit becomes jammed in the

workpiece.

n) On completion of work, allow the machine to slide back to its initial position by releasing the

handle.

o) Make yourself familiar with your working area and be alert for possible hazards, which you

might not hear due to machine noise.

p) Caution: Allow for run down time of bit after turning router off. Wait for the machine to come

to a complete stop before removing from the workpiece.

q) Never slow the router down with your hands.

r) Do not touch the bit immediately after operation; it may be extremely hot and could burn

you.

s) Never stop the router by applying lateral pressure to the bit.

t) Do not force the router. Your router will do a better job if you take it slowly.

u) Avoid cutting nails and screws. Inspect timber and remove all nails and screws before

cutting.

v) In the event of an electrical or mechanical malfunction, immediately switch off the router

and disconnect the power lead from the mains supply, and contact Draper for assistance.

5.3

RESIDUAL RISK

Important: Although the safety instructions and operating manuals for our tools contain extensive

instructions of safe working with power tools, every power tool involves a certain residual risk

which can not be completely excluded by safety mechanisms. Power tools must therefore always

be operated with caution!

– 8 –