Draper 70300 Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Smerigliatrice Draper 70300. Draper 70300 20. Angle grinder/cut-off tool
Stampa la pagina
–
Ensure that sparks resulting from use do not create a hazard e.g. do not hit persons, to ignite
flammable substances.
–
Always use eye and ear protection.
–
Personal protective equipment such as dust mask, gloves, helmet and apron should be worn.
–
The wheel continues to rotate after the tool is switched off.
Warning!
Prior to mounting an abrasive wheel ensure the expiry date has not exceeded rendering it
potentially hazardous.
Secure work. Use clamps or a vice to hold the work. It is safer than using your hands and it frees
both hands to operate the tool.
Stay alert. Watch what you are doing. Use common sense. Do not operate tool when you are tired.
Wear proper clothing. Do not wear loose clothing, neckties or jewellery (ring, wristwatches etc.)
to catch in moving parts. Non-slip footwear is recommended. Wear protective covering to contain
long hair. Roll long sleeves above the elbow.
Use safety goggles (Head protection). Wear goggles approved to the relevant standards at
all times. Normal spectacles only have impact resistant lenses, they are NOT safety glasses.
Also, use face or dust mask if application is dusty and ear protectors during all operations.
Sound levels. Some types of machines may have high sound levels when working. In such cases
ear protection must be worn.
Vibration levels. Hand held power tools produce different vibration levels. You should always
refer to the specifications and the relevant Health and Safety guidelines.
Dust extraction. If your tool is fitted with a dust extraction facility, always ensure that it is
connected and being used with a dust extractor. Vacuum cleaners can be used if suitable for the
material being extracted.
Check damaged parts. Before use, any blade guard or other part that is damaged should be
carefully checked to determine that it will operate properly and perform its intended function.
Check for alignment of moving parts, free running of moving parts, breakage of parts, mounting
and any other conditions that may affect its operation. A guard or other part that is damaged
should be properly repaired or replaced by an authorised service centre unless otherwise indicated
in this instruction manual. Have defective switches replaced by an authorised service centre.
Do not use the tool if the switch does not turn it on and off.
Have your tool repaired by a qualified person. Use of this electric tool is in accordance with the
relevant safety requirements. Repairs should only be carried out by qualified persons using
original spare parts, otherwise this may result in considerable danger to the user.
5.3 SAFETY RECOMMENDATIONS FOR THE CORRECT USE OF
ABRASIVE PRODUCTS
General. Bonded abrasive products are breakable and shall therefore be handled with utmost
care. The use of damaged or improperly mounted or used abrasive products is dangerous and can
cause serious injuries.
Delivery, handling and storage. Abrasive products must be handled and transported with care.
Abrasive products must be stored in such a manner that they are not subjected to mechanical
damaged and harmful environmental influences.
Selection of the abrasive product. Information on the label or the abrasive product stating
restrictions of use, safety indications or any other instructions must be followed. In case of doubt
concerning the selection of abrasive products, the user shall request information from the
manufacturer or supplier.
– 9 –