Draper LightBloc ZIP 92 Istruzioni per l'installazione e il funzionamento - Pagina 5

Sfoglia online o scarica il pdf Istruzioni per l'installazione e il funzionamento per Arredamento per interni Draper LightBloc ZIP 92. Draper LightBloc ZIP 92 12.

Stampa la pagina
LightBloc ZIP™ 92 & ZIP 127
Section 5 - Installing Side Channels
Section 5.1 - Preparation
1. Use 1/ 8 "
Hex Key to remove Screws from Side Channels and
(3 mm)
Side Channel Covers
.
(Fig. 6-A)
Please Note: Do NOT remove the Bottom Caps from Side Channels.
2. For jamb mounting, remove the Fabric Retainer Strip and set aside.
Figure 6-A
Section 5.2 - Attaching Side Channels to Mounted Square or Curved Headbox
Figure 7
Insert
Side
Channel
Guide.
S i d
C h
e
a n n
e l
1. Insert Side Channel Guide and Fabric Retainers into Side Channels
.
(Fig. 7)
Please Note: Make sure Fabric Retainers go back into Side Channels
with Fabric Guide at top of Side Channels and angled leg towards the
back
.
(Fig. 8-A & 8-B)
2. Insert "Zipper" on one side of Hem Bar into fabric retainer in Side
Channels
.
(Fig. 8-A)
3. With "Zipper" engaged in Fabric Retainer, insert side channel guide
into bottom of Headbox
(Fig. 8-B)
4. Attach side channel to mounting surface using appropriate fasteners.
IMPORTANT: Side Channels must be installed parallel, plumb, and
square, with a tolerance of +/- 1/ 8 "
5. Repeat Steps 2 - 4 for the other Side Channel.
6. Re-attach Side Channel Covers using the screws removed in Step 1.
Please Note: Failure to use provided fasteners to re-attach Side Channel
covers may result in product failure in high wind.

(Square or Curved Headbox ONLY)

Wall Mounting
J a
m
b M
P i
l o t
o u
n t
H o
l e
Wall Mounting
Jamb Mounting
U P
Angled leg of FABRIC RETAINER STRIP
must be oriented towards back
Side Channel Cross Section
.
.
(3mm)
3. Drill Side Channels at desired mounting points
4. Mark wall or jamb and drill small pilot holes in mounting
surface.
Please Note: Maximum spacing between fasteners
is 24"
.
(610mm)
A
Jamb Mounting
DO NOT remove
If they come off, reattach with double-sided tape.
S i d
C h
e
a n
n e
l
ENDCAP
Side
Channel
Guide
Figure 8-B
page 5 of 12
.
(Fig. 6-B)
Figure 6-B
B
Neoprene
cushions.
Figure 8-A
ZIPPER
S i d
C h a
e
n n e
l
ENDCAP
Side
Guide Properly
Channel
C
HEM
BAR
FABRIC
RETAINER
STRIP
Side Channel
Engaged
in Headbox