Draper 1/2S-300D Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Sander Draper 1/2S-300D. Draper 1/2S-300D 16. 230v 1/2 sheet sander

Draper 1/2S-300D Manuale
4.

INTRODUCTION

4.1 SCOPE

This sander is intended for domestic and infrequent light trade use only.
As part of our core range, this product is suitable for enthusiasts and tradespeople alike. Any
application other than that it was intended for, is considered misuse.

4.2 SPECIFICATION

Stock No. ....................................................................................................................................... 57941
Part No. ..................................................................................................................................1/2S-300D
Motor:
Rated voltage ........................................................................................................................ 230V~
Rated frequency ...................................................................................................................... 50Hz
Rated input ............................................................................................................................ 300W
Revolutions per minute (no load) .................................................................................. 11,000min
Pad size...................................................................................................................225mm x 115mm
Sound pressure level (LpA)*: ............................................................................. 79dB(A), K=3 db(A)
Sound power level (LWA)**: ............................................................................... 90dB(A), K=3 db(A)
Uncertainty (K): .......................................................................................................................... 3dB(A)
Vibration level†: ..................................................................................................... 13.1m/s², K=1.5m/s
Weight (machine only).......................................................................................................... 2.315kg
†When sanding in wood.
4.3 HANDLING & STORAGE
– Care must be taken when handling this product.
● Dropping this power tool could have an effect on its accuracy and could also result in personal
injury. This product is not a toy and must be respected.
– Environmental conditions can have a detrimental effect on this product if neglected.
● Exposure to damp air can gradually corrode components.
● If the product is unprotected from dust and debris, components will become clogged.
● If not cleaned and maintained correctly or regularly, the machine will not perform at its best.
- 5 -
-1
2