Draper 98427 Manuale di istruzioni - Pagina 16

Sfoglia online o scarica il pdf Manuale di istruzioni per Sander Draper 98427. Draper 98427 20. 230v oscillating spindle sander

10. MAINTENANCE

10.1 MAINTENANCE

Regular inspection and cleaning reduces the necessity for maintenance operations and will keep

your tool in good working condition.

The motor must be correctly ventilated during tool operation. For this reason avoid blocking the air

inlets. After use disconnect the tool from the power supply and vacuum the ventilation slots.

If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his

agent in order to avoid a safety hazard.

Warning! For you own safety always turn the main switch on the machine "OFF" and remove the

plug from the power supply before carrying out any maintenance or troubleshooting.

Problem

Motor does not start.

Machine slows down when

sanding.

Sanding belt runs off pulleys.

Wood burns while sanding.

Important: Please note all repairs/service should be carried out by a qualified person.

Possible Cause

1. Defective ON/OFF switch.

2. Burned out motor.

1. Drive belt too tight.

2. Applying too much

pressure to workpiece.

1. Not tracking properly.

1. Sanding disc or belt is

glazed with sap.

– 16 –

Remedy

1. Replace defective parts

before using again.

2. Any attempt to repair this

motor may create a

HAZARD unless repair is

done by a qualified

service technician.

1. Decrease belt tension.

2. Ease up on pressure.

1. Adjust tracking.

1. Replace disc or belt.