Draper Storm Force MT400 SF Manuale di istruzioni per l'uso - Pagina 11
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Sander Draper Storm Force MT400 SF. Draper Storm Force MT400 SF 20. 400w 230v oscillating multi-tool kit
Anche per Draper Storm Force MT400 SF: Istruzioni per (16 pagine)
Stampa la pagina
8.
BASIC MULTI-TOOL OPERATIONS
8.1 ATTACHING THE SANDING PADS -
FIGS. 1 - 2
NOTE: Switch off the Multi-Tool and remove the plug
from the power socket before carrying out adjustments,
servicing or maintenance.
Caution: For all work or when changing application
tools, always wear protective gloves. Avoid danger of
injury from the sharp edges of the application tools.
Application tools can become very hot while working,
presenting danger of burns.
Warning: To reduce the risk of injury, do not let the
universal saw blades or any segment saw blades face
back toward the user's hand.
Unscrew the bolt
free from dust and debris prior to fitting the next tool.
Place the application tool exactly onto flange
that the application tool has a flush fit. Reposition and
tighten the bolt
.
NB: Ensure bolt
Failure to do this will result in poor performance.
8.2 MOUNTING/CHANGING THE SANDING
SHEET - FIG. 3
Align the sanding sheet
sanding pad
by hand.
Firmly press the power tool with the sanding sheet
against a flat surface and briefly switch the power tool
on. This provides for good adhesion and prevents
premature wear. If one point has become worn, pull off
the sanding sheet, turn it 120° and replace.
8.3 OPERATING THE ON/OFF SWITCH - FIG. 4
To switch the power tool ON, slide switch
reveal "I".
To switch the power tool OFF, slide switch
to reveal "O".
ensure area around
(Fig.2) using the supplied hex. key
and flange
are tightened firmly.
and press it onto the
FIG.1
and
is
. Note
FIG.2
forward to
backward
FIG.3
FIG.4
11