Bosch WLK20261IN Manuale di istruzioni e istruzioni per l'installazione - Pagina 26
Sfoglia online o scarica il pdf Manuale di istruzioni e istruzioni per l'installazione per Lavatrice Bosch WLK20261IN. Bosch WLK20261IN 40.
Stampa la pagina
Additional programme settings
en
ñ Finished in
ñ Finished in
Before starting the program, you can
preselect the program end ("Ready in"
time) in hourly increments (h = hour) up
to a maximum of 24 hours.
To do this:
Select a program.
1.
The program duration is displayed
for the selected program, e.g. 2:30
(hours:minutes).
Press the ñ Finished in button
2.
repeatedly until the required number
of hours is displayed.
Press the A Start/Reload button.
3.
The door will be locked.
The selected number of hours (e.g. 8
h) is shown in the display panel and
counts down until the wash program
starts. The duration of the program is
then displayed.
During the timer count-down, you can
change the preselected number of
hours as follows:
Press the A Start/Reload button.
1.
Use the ñ Finished in button to
2.
change the number of hours.
Press the A Start/Reload button.
3.
During the timer count-down, you can
add or remove laundry as required:
Press the A Start/Reload button.
1.
Open the door and add or remove
2.
laundry.
Close the door.
3.
Press the A Start/Reload button.
4.
The length of the program is
Note:
automatically adjusted when the
program is running.
Certain factors can affect the program
length, e.g.:
26
Program settings,
■
Detergent dosage (additional rinse
■
cycles if required due to foaming),
Load size/type of textiles (longer
■
washing for higher load and for
textiles which absorb more water),
Imbalances (e. g. due to fitted
■
sheets) are offset with several start-
ups of spin cycles,
Fluctuations in power supply,
■
Water pressure (infeeding speed).
■
\
Additional programme
settings
You can find possible additional
Note:
A d d i t i o n a l p r o g r a m m e s e t t i n g s
programme settings in the overview;
these differ depending on the model.
G Speed/F Eco
G Speed/F Eco
Button with two possible settings for
adapting the selected program:
G Speed
■
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected program,
without the G Speed/F Eco
setting.
Do not exceed the maximum
Note:
load.
F Eco
■
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
program, without the G Speed/F
Eco setting.
Press the button to do this. First of all,
you can select the G Speed setting. If
you press the button again, the F Eco
setting is active. The respective symbol
is shown in the display when the setting
is activated.
If you press the button again, no setting
is active.