Drawmer 1970 Manuale dell'operatore - Pagina 10
Sfoglia online o scarica il pdf Manuale dell'operatore per Apparecchiature di registrazione Drawmer 1970. Drawmer 1970 12. Dual fet compressor & pre-amplifier
Stampa la paginaIF A FAULT DEVELOPS
For warranty service please call Drawmer Electronics Ltd. or
their nearest authorised service facility, giving full details of
the difficulty.
A list of all main dealers can be found on the Drawmer
webpages.
On receipt of this information, service or shipping instructions
will be forwarded to you.
No equipment should be returned under the warranty without
prior consent from Drawmer or their authorised representative.
For service claims under the warranty agreement a service
Returns Authorisation (RA) number will be issued.
Write this RA number in large letters in a prominent position
on the shipping box. Enclose your name, address, telephone
number, copy of the original sales invoice and a detailed
description of the problem.
Authorised returns should be prepaid and must be insured.
All Drawmer products are packaged in specially designed
containers for protection. If the unit is to be returned, the original
container must be used. If this container is not available, then
the equipment should be packaged in substantial shockproof
material, capable of withstanding the handling for the transit.
1970
INPUT
Input Impedance
Maximum Input Level
OUTPUT
Output Impedance
Maximum Output Level
FREQUENCY RESPONSE
CROSSTALK
NOISE AT UNITY GAIN
20Hz - 20kHz
10
GENERAL INFORMATION
DUAL FET COMPRESSOR AND PRE-AMPLIER
DATA SPECIFICATION
20k Ohms or greater
+21dBu
100 Ohms
+21dBu into 10k Ohms Load
20Hz to 20kHz +/-0.5dB
< -75dB @ 1kHz
>93dB
DRAWMER 1970 O
CONTACTING DRAWMER
Drawmer Electronics Ltd., will be pleased to answer all
ap plic atio n qu estion s to enh an ce you r usag e of this
equipment. Please address correspondence to:
Drawmer (Technical Help line)
Coleman Street
Parkgate
Rotherham
S62 6EL
UK
Alternatively contact us by E-mail on :
for sales enquiries: [email protected]
or for technical issues: [email protected]
Further information on all Drawmer dealers, Authorised service
departments and other contact information can be obtained
from our web pages on:
http://www.drawmer.com
% DISTORTION (THD & NOISE)
0dB (ref +4)
0.01%
10dB (ref +4)
0.01%
MIC EIN
-130dB
POWER REQUIREMENTS
230Volt or 115V at 50-60hZ, 630VA
FUSE RATING
T250mA for 230Volt,
T500mA for 115Volt
Conforming to IEC 127-2
FUSE TYPE
20mm x 5mm, Class 3 Timed-Blo, 250Volt working
CASE SIZE
482mm (W) x 88mm (H) x 270mm (D)
WEIGHT
4.2Kgs
M
PERATOR'S
ANUAL
CHAPTER 3
@ 1kHz