Drawmer MXPro MX40 Manuale dell'operatore - Pagina 6

Sfoglia online o scarica il pdf Manuale dell'operatore per Apparecchiature musicali Drawmer MXPro MX40. Drawmer MXPro MX40 16. Quad punch gate

The four channels of the MX40 are virtually identical and may be used completely

independently or linked as pairs for stereo-channel operation. In the linked stereo

mode, only the controls of channel 1 and channel 3 are functional and serve as master

controls, though all the channel Bypass, Key Listen and Range switches remain

independent. W hen linked, the control signal is derived only from the programme

material present at the input of the master channel.

Threshold

Display

Release

Peak Punch

Range

Bypass

CONTROL DESCRIPTION

-60dB to greater than +20dB

Sets the level at which the gate opens.

The famous Drawmer "traffic light" display shows gate status.

Gate Closed

25mS to 4S.

Additionally some envelope hold time is built into the system

which varies with the release time setting.

Peak Punch is a dynamic feature which accelerates the leading

edge as the gated signal opens, adding more than 6dB of gain for

approximately 10mS with proprietary release characteristics.

Determines how much gain reduction is applied when the gate is

fully closed. A setting of -90dB effectively silences the signal

completely, while the -20dB setting will still allow an attenuated

version of the signal to pass through. We recommend this switch

is left in the -90dB (out) position.

For signals with a high levels of background noise, the very fact

of closing down to -90dB can be disconcertingly noticeable. In

such cases the -20dB switch setting can achieve better results.

Note: This control is active on both channels, even in stereo

linked operation.

The Bypass position routes the input signal to the output with no

processing.

N o te :

T h e s e s w itc h e s a re in d e p e n d e n t o f a n y lin k in g a n d w ill o n ly

b y p a s s th e ir re s p e c tiv e c h a n n e l.

Hold Time

Gate Open