Bosch 800 Series Manuale di istruzioni per l'installazione - Pagina 8

Stampa la pagina

Bosch 800 Series Manuale di istruzioni per l'installazione

WARNING

Avoid Electrical Shock Hazard!

Do not work on an energized circuit. Doing so could

result in serious injury or death. Only qualified electricians

should perform electrical work. Do not attempt any work

on the dishwasher electric supply circuit until you are

certain the circuit is de-energized.

Improper connection of the equipment-grounding

conductor can result in a risk of electric shock. Check with

a qualified electrician or serviceman if you are in doubt as

to whether the appliance is properly grounded.

DO NOT modify the plug provided with the appliance; if it

will not fit the outlet, have a proper outlet installed by a

qualified electrician.

To avoid possible injury or property damage, care should

be exercised when the dishwasher is installed or removed

to reduce the likelihood of damage to the power cord.

Avoid Fire Hazard!

Make sure electrical work is properly installed and checked

by qualified electricians.

Make sure there are no loose electrical connections. Make

sure all electrical connections are properly made.

Loose and improperly installed electrical connections

can result in overheating!

To avoid risk of fire, observe the following precautions:

Wall Socket Connections:

Only use the provided power cord for wall socket

connections.

DO NOT attach an extension cord or any type of modified

cord or adapter with this appliance.

DO NOT cut or splice the power cord.

DO NOT alter the power cord in any way.

Permanent Wire Connections (in addition to the

warnings above):

Only use the junction box power cord, sold as Accessory

kit #SMZPCJB1UC.

Carefully review the terminal block installation instructions.

DO NOT remove, alter or bypass the terminal block.

Electrical Supply

The customer has the responsibility of ensuring that the dish-

washer electrical installation is in compliance with all national

and local electrical codes and ordinances. The dishwasher is

designed for an electrical supply of 120V, 60 Hz, AC, connect-

ed to a dishwasher-dedicated, properly grounded electrical cir-

cuit with a fuse or breaker rated for 15 or 20 amps.

Electrical Preparation

Dishwasher Electrical Rating

Grounding Instructions

This appliance must be grounded. In the event of a

malfunction or breakdown, grounding will reduce the risk of

electric shock by providing a path of least resistance for

electric current. This appliance is equipped with a cord

having an equipment-grounding conductor and a grounding

plug. The plug must be plugged into an appropriate outlet

that is installed and grounded in accordance with all local

codes and ordinances.

Make sure that the dishwasher is connected to a suitable

ground in compliance with all local codes or, in the absence

of a local code, with the NATIONAL ELECTRICAL CODE in

the United States or the CANADIAN ELECTRIC CODE

C22.1-latest edition in Canada as well as any provincial/state

or municipal or local codes that apply.

Note: Installations requiring hard wiring and terminal

block - The accessory terminal block/junction box model,

SMZPCJB1UC, designed for permanent wire connection, is

not included but can be ordered through Customer Service by

calling 1-800-944-2904. Follow the instructions included with

the kit.

Strap

Figure 5

•

Plug the end of the supply cord into the back of the

dishwasher. Be sure it goes through the strap on either

the right or left side of the dishwasher.

•

The outlet for the power supply cord should be located in

a cabinet or wall adjacent to the dishwasher cabinet.

•

Do not plug dishwasher in until all the steps of installation

are complete.

Note: Only use the included power cord. If cord is missing

order kit SMZPC002UC through Customer Service.

Volts Hertz

Amperes

120

Watts

1,440

(max)