Bosch Benchmark 500 Series Manuale di installazione - Pagina 14
Sfoglia online o scarica il pdf Manuale di installazione per Forno Bosch Benchmark 500 Series. Bosch Benchmark 500 Series 22. Built-in combination ovens
Anche per Bosch Benchmark 500 Series: Manuale di installazione (39 pagine)
![Bosch Benchmark 500 Series Manuale di installazione](/uploads/products/server2/1377089/1377089.jpg)
Ovens with Bottom Hinge Doors Only
Re-Install the oven doors:
English 10
1. Hold the door firmly in
both hands.
2. Hold the door at a 30º
angle from the closed
position and insert
hinges into the slots.
You may need to rock
the door forward and
backward slightly to
seat the hinge feet.
3. The door may need to
be removed and re-
inserted until the
hinges sit correctly in
the slots.
4. Open door all the way
to expose hinges,
latch levers, and slots.
5. Push latch levers
forward and down until
seated on the bracket.
6. Close and open door
slowly to be sure it is
correctly and securely
in place. Door must be
straight, not crooked.
Ovens with Side Hinge Doors Only
Side Hinge Door Aligment
Note: Only align the side hinge oven doors after the unit is
fully installed into the cabinet.
Fig. A
Fig. B
1. Check to see if the
side hinge oven doors
are properly aligned.
The door should pull
itself closed smoothly
when the striker
engages the roller as
the door is closed.
2. Too high (Fig. A - door
needs to move down
on latch side) you will
feel interference
between the striker
and the catch receiver.
3. Too low (Fig. B - door
needs to move up on
latch side) you will feel
a bump when the
striker comes into
contact with the re-
alignment roller.
Hint: The gap between
the top of the closed
oven door and the
control panel (or upper
door for lower cavities
in double ovens)
should be fairly
uniform from side to
side.
9001065629 Rev A