Alemlube 600A Istruzioni di servizio

Sfoglia online o scarica il pdf Istruzioni di servizio per Strumenti Alemlube 600A. Alemlube 600A 2. Lever action grease gun
Anche per Alemlube 600A: Manuale tecnico del proprietario (2 pagine), Manuale d'uso (2 pagine)

Stampa la pagina
Alemlube 600A Istruzioni di servizio
SERVICE INSTRUCTIONS
Description
Model 600A is a lever action 450gm grease gun capable of generating up to 12,000 psi. It comes standard with a
16.5cm rigid extension & 4 jaw coupler for lubricating points. It has a 600gm bulk grease capacity & comes with a 12
month warranty.

Specifications

Uses
Pressure Capabilities
Delivery

Operating Instructions

There are two ways to fill the gun with grease:
A: 450 gm Grease Cartridge:
Unscrew the grease barrel from the gun and insert the 450gm grease
cartridge by holding the barrel assembly and pulling the rod back. Remove
cap from the grease cartridge, insert the cartridge into the barrel and then
rescrew the barrel assembly back onto the gun so that the cartridge sits well
against the follower cup. Once in position, press the clamp down & push
the rod firmly back into the barrel.
Important To Note:
When using the gun with a cartridge, the follower cup must be folded back.
The gun is supplied standard with the follower cup in this position.
B: Bulk Grease Loading:
Unscrew the grease barrel from the gun head & insert the barrel into the
bulk grease. Suck the grease up into the barrel by pulling the rod all the way
back. When barrel is full with grease, rescrew the barrel assembly back onto
the gun head so that the follower sits well against the grease. Press the
clamp down & push the rod firmly back into the barrel.
Important To Note:
When using the gun with bulk grease, the follower cup must be folded
forward. To do this, take the follower cup and rod assembly out of the barrel,
fold the follower cup forward and reassemble the barrel assembly.
Maintenance
Cleaning: always keep the follower cup free of impurities. Your grease
should be clear of any foreign particles, dirt etc and the gun should be
checked and cleaned regularly.

Trouble Shooting

Air Pocked In Grease: If the gun is pumped but no grease appears from the coupler:
1: Depress the air bleeder valve on the head and pump a few strokes.
Unscrew the barrel assembly from the gun head with two or three turns and then push on the plunger rod. With the
follower cup engaged the follower cup will move further down into the barrel venting any trapped air out through the
thread connections between the barrel and head. Unscrew the rigid extension as well.
Head Office NSW
VIC
TEL: (02) 9939 0711
TEL: (03) 8787 8288
FAX: (02) 9939 0411
FAX: (03) 8787 8266
Visit our website at
600 Lever ction Grease Gun
450gm Grease Cartridges, Suction loading, Bulk loader pump from bulk grease drum.
Up to 12,000 psi grease pressure
1.6cc per stroke
QLD
TEL: (07) 3889 8480
FAX: (07) 3889 8490
www.alemlube.com.au
S /NT
W
TEL: (08) 8241 7111
TEL: (08) 9209 3066
FAX: (08) 8241 7011
FAX: (08) 9209 3933
600A
T S
TEL: (03) 6343 0477
FAX: (03) 6343 0911