AirStage UTY-RNK Series Manuale operativo - Pagina 8

Sfoglia online o scarica il pdf Manuale operativo per Condizionatore d'aria AirStage UTY-RNK Series. AirStage UTY-RNK Series 13. Air conditioner remote controller wired type

Stampa la pagina
WEEKLY TIMER
To start/cancel the WEEKLY timer operation
● To start
The independent timer
will flash on the display.
When the weekly timer is selected, the
timer starts automatically.
NOTES
(1) PRECAUTIONS DURING WEEKLY TIMER SETUP
Setup is not possible in the following cases, so amend
the time.
• Be sure to set the ON time first, then the OFF time. If
either the ON time or the OFF time is not set cor-
rectly, the timer will not operate properly.
• The WEEKLY 2 settings cannot be set earlier than the
WEEKLY 1 settings.
• The WEEKLY 1 and WEEKLY 2 time spans cannot
overlap.
To set the DAY OFF (for a holiday)
1
During the weekly timer,
press the TIMER SET button
for 2 seconds or more to set
the day.
NOTES
(1) The DAY OFF setting is only available for days for which weekly settings already exist.
(2) If the operating time carries over to the next day (during a next day setting), the effective DAY OFF range will be set as
shown below.
● Normal
OFF
ON
WEEKLY
Preceding day
(3) The DAY OFF setting can only be set one time. The DAY OFF setting is cancelled automatically after the set day has
passed.
En-7
ex. Operating time 7:00-18:00
The operating time for the current
day is displayed.
2
Select the day to set the DAY
OFF.
ex. The DAY OFF is set for Monday.
DAY OFF
OFF
ON
WEEKLY
Setting day
Next day
3 6 9 12 15 18 21
Indpnd. OFF time 21:00
(2) The earliest OFF time you can set is 30 minutes after the
ON time.
(3) The OFF time can be carried over to the next day.
(4) The earliest independent OFF time you can set is 30 min-
utes after the last OFF time.
(5) An independent OFF time can be set up to 0:00 hours of
the next day.
(6) Even if the timer operation is set, the timer indicator lamp
of the indoor unit does not light up. (The timer indicator
lamp is used for wireless remote controllers only.)
3
Press the DAY (DAY OFF)
button for 2 seconds or
more to set the DAY OFF.
● Next day setting
ON
WEEKLY
Preceding day
● To cancel
• Press the TIMER DELETE button to
cancel the timer mode.
• The timer mode can also be
canceled by changing the timer
mode using the TIMER MODE but-
ton.
4
Press the TIMER SET button
for 2 seconds or more to
complete the DAY OFF set-
ting.
Flashing mark:
Indicates the DAY OFF
● To cancel
Follow the same procedures as
those for setup.
DAY OFF
OFF
OFF
ON
WEEKLY
Setting day
Next day