Electrolux 506063 Manuale - Pagina 19

Sfoglia online o scarica il pdf Manuale per Lavatrice Electrolux 506063. Electrolux 506063 28.

Stampa la pagina

Preliminary checks, adjustments and

operational tests

IMPORTANT!

These operations must only be carried

out by specialized technicians pro-

vided with adequate personal protec-

tion equipment (e.g. safety footwear,

gloves, glasses, etc.), tools and suita-

ble ancillary equipment.

H1.1

Electrical and plumbing checks

Before starting the appliance:

•

check correct connection of the electrical wires that

feed the appliance;

•

make sure the power supply voltage and frequency

match the data given in Table 1;

•

check correct connection of the water supply and

drain pipes (see par. F6 "Plumbing connections");

•

make sure all the guards and safety devices are in

place and efficient.

H1.2

Check the positioning of tank components

IMPORTANT!

The following operations must be car-

ried out by operators provided with

suitable personal protection equipment

(e.g. protective gloves, etc.) with the

appliance switched off and cold.

H1.2.1

Check the fitting of filters

Make sure the filters "C" - "D" - "E" are correctly fitted

(Figure 15).

Figure 15 Tank filters

H1.2.2

Arm fitting check

Make sure the upper and lower wash and rinse arms

are correctly fitted (Figure 16).

STARTING

•

The peristaltic dispensers (detergent and rinse aid)

and the tube inside the rinse aid dispenser require

periodical maintenance (at least once or twice a year)

or after prolonged periods of appliance inactivity.

1. Appliance with incorporated detergent dis-

Pump "R" dispenses about 0.9 g/s of detergent. When

the appliance is filled with water for the first time in the

day, it dispenses about 46 g of detergent in 55 sec.,

thereby providing a concentration of 2 g/l. Pump "R"

dispenses about 4 g in 5 sec. at each cycle.

Dispenser operating time may be changed, following

the instructions given in the next paragraph (H4 Setting

the dispenser).

Insert the hose provided in the kit into the detergent

container.

Connections for automatic detergent dispenser

(Figure 17)

The wash tank has a (plugged) hole "N" (Ø 22 mm) for

fitting a sensor which measures the concentration of

detergent.

Figure 16 Wash and rinse arms

Starting

Open the water supply cocks.

Turn the main switch of the appliance to "I".Press

the On/Off key Table 2 ("A" - "Control panel").

Detergent dispenser and settings

penser pump (Figure 17).