Electrolux 816 Manuale - Pagina 9

Sfoglia online o scarica il pdf Manuale per Lavatrice Electrolux 816. Electrolux 816 23.

Choose the load size

The LOAD SIZE pad selects the water level in the wash bowl;

To change the water level,

Press the LOAD SIZE pad.

Each press of the pad will change the load size;

EX-SMALL-->SMALL-->MEDIUM-->LARGE

The lights will stay on as the pad is pressed, eg. Medium has three

lights ON.

The washing machine reduces the washing time when a smaller

load size is selected. This is shown on the electronic display.

Choose the wash temperature

Press the WASH TEMP pad to select the temperature you require;

there are five temperatures to choose from.

WARM-->WARMER-->HOT-->COLD etc.

All rinse water temperatures are cold except for the woollens cycle.

When a HOT water wash has been selected the washing machine

will initially wet the clothes with cold water to avoid fabric damage.

IMPORTANT:

Press START/PAUSE.

The washing machine will start the wash programme you have

selected. The time to complete the wash programme will be shown

on the electronic display.

NOTE:

When a wash programme has finished, all of the progress indicator

lights will be 'off', but the selected wash programme lights will

remain 'on'. ie; WASH light, LOAD SIZE light and WASH TEMP light.

The electronic display will show 'Fn' to tell you the wash

programme has finished.

The washing machine will 'Beep' at the end of a wash programme

unless selected otherwise, see page 9 to switch off end of wash

Beeper.

Some hot water supplies are TOO hot

and can damage your washing

machine and clothes.

Make sure that your hot water supply

is not hotter than 70°C. If your water

supply is too hot you may need to fit

a temperature limiting valve. This

must be fitted by a qualified plumber.

This time does not include the time that the washing

machine will take to fill with water because of the different

water pressures in homes.