AirStage UTY-RHKY Manuale operativo - Pagina 2
Sfoglia online o scarica il pdf Manuale operativo per Telecomando AirStage UTY-RHKY. AirStage UTY-RHKY 2. Uty-rhk series
Anche per AirStage UTY-RHKY: Manuale di installazione (8 pagine), Manuale operativo (20 pagine)
Stampa la pagina
NOTES
Operation mode display.
AUTO
COOL
DRY
(Select HEAT or COOL automatically.)
* If the priority mode is set to "Priority on Control Indoor Unit",
the operating mode of other indoor units except Control
Indoor Unit will be controlled by a Control Indoor Unit.
* If the operating mode of Administrative Indoor Unit is set to
"AUTO", "AUTO" is displayed in addition to the display of
current operating mode on other wired remote controllers
except Administrative Indoor Unit. In this case, operation of
other indoor units is controlled by the Administrative Indoor
Unit.
Ex. : When operating mode of the Administrative Indoor Unit
is set to "AUTO" while air conditioning setting.
(The indication on other wired remote controllers
except Administrative Control Indoor Unit).
When Administrative Indoor
Unit is set to "AUTO".
START / STOP
Each press of the
button alternates operation
and stop.
When operating, operation lamp (green)
FAN SPEED
Press the
button while in operation.
NOTES
AUTO
HIGH
(Select the fan speed automatically.)
FAN
HEAT
will light up.
MED
LOW
OPERATION
ERROR CODE DISPLAY
If an error occurs, the following display will be shown.
(" " will appear in the set room temperature display.)
If " " is displayed, immediately contact authorized
service personnel. Do not used the operation as
shown to the right if an error has occurred.
NOTES
If an error is displayed, please contact the front
desk or room service.
NOTES
(1) Display panel lights up.
(2) When
is displayed, there are functions for
which settings cannot be made.
When a button is pushed to change a restricted
setting,
will flash.
(3)
is also displayed when the following
restrictions are in effect.
•
Restricted settings
•
Upper and lower temperature setting limits
•
During control of the operation mode
TEMPERATURE
Press the
button while in operation.
/
NOTES
Temperature setting range
AUTO • • • • • • • • • • • • • 18 to 30°C
HEAT • • • • • • • • • • • • • 16 to 30°C
COOL/DRY • • • • • • • • • 18 to 30°C
The temperature setting should be considered a
standard value, and may differ somewhat from the
actual room temperature.
Error code
Faulty unit No.
(Remote controller address)
Ex. Error code display