Bosch HBC24D533W Manuale di istruzioni - Pagina 12

Sfoglia online o scarica il pdf Manuale di istruzioni per Forno Bosch HBC24D533W. Bosch HBC24D533W 24.

Stampa la pagina

Basic settings

Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
If you want to cancel all the changes, you can restore the
factory settings.
If required, turn the operating mode selector to
1.
the appliance.
Basic setting
Function
Display brightness
™‹ „
Signal duration:
™‚ ƒ
Sets the length of the audible signal at the end of an opera-
tion
Display the clock when the appliance is off
™ƒ ‚
Continues operation after the door is closed. The operation
™„ ‚
does not go back to the beginning when the appliance door
is opened
Time until changes are automatically saved
™... ƒ
Sets the water hardness range for the descaling indicator
™† ƒ
Steam cooking heat signal
™‡ ‹
Restore the appliance to the factory settings:
™ˆ ‹
All changes to the basic settings are cleared
■
Automatic calibration is carried out again
■

Care and cleaning

In this section, you will find information on
the care and cleaning of your appliance
■
Descaling
■
:
Risk of short circuit!
Do not use high-pressure cleaners or steam jet cleaners to
clean your appliance.
Caution!
Risk of surface damage: Do not use
harsh or abrasive cleaning agents
■
oven cleaners
■
corrosive or aggressive cleaners, or those containing
■
chlorine
cleaning agents with a high alcohol content
■
If such an agent comes into contact with the front of the
appliance, wash it off immediately with water.
12
Press and hold the
2.
bright) appears in the display.
Press the
3.
Press the
4.
Press and hold the
5.
Û
to switch off
The change is saved.
You can change the following basic settings:
Caution!
Risk of surface damage: If descaler comes into contact with the
front of the appliance or any other sensitive surfaces, wash it off
immediately with water.
Remove food residues from the cooking compartment as soon
as the appliance has cooled.
Salts are very corrosive and can cause rust. Remove remains
of acidic sauces (ketchup, mustard) or salted food from the
cooking compartment immediately after cooling.
Do not use hard scouring pads or cleaning sponges.
0
button until
™‹ „
button until the desired basic setting appears.
0
or
button to change the basic setting.
A
@
0
button to exit basic settings.
Possible settings
= dark
™‹ ‚
™‹ ƒ
= medium
= bright
™‹ „
= short (10 seconds)
™‚ ‚
= medium (2 minutes)
™‚ ƒ
= long (5 minutes)
™‚ „
= off
™ƒ ‹
™ƒ ‚
= on
= off
™„ ‹
= on
™„ ‚
™... ‚
= short (2 seconds)
= medium (5 seconds)
™... ƒ
™... „
= long (10 seconds)
= softened
™† ‹
= soft (I)
™† ‚
™† ƒ
= medium (II)
= hard (III)
™† „
™† ...
= very hard (IV)
= off
™‡ ‹
= on
™‡ ‚
= do not restore
™ˆ ‹
™ˆ ‚
= restore
(display brightness =