Bdcom S2008 Manuale di installazione dell'hardware - Pagina 3
Sfoglia online o scarica il pdf Manuale di installazione dell'hardware per Router di rete Bdcom S2008. Bdcom S2008 16.
Stampa la paginaChapter 1 Information of BDCOM S2008 Switch
This section explains the parameters of BDCOM S2008 switch.
1.1 Standard configuration
BDCOM S2008switch standard ports consists of 2 parts: 8 fast Ethernet interfaces and 1 Console
interface. Refer to the following table:
Features of standard ports:
Port name
Fast
interfaces
Console
In addition, there are 2 extended Ethernet slots in front of the S2008switch, a grounding bar in the rear
and a power supply plug and a power switch (ON and OFF) plug.
The front-panel of BDCOM S2008 Switch is shown below:
Components of BDCOM S2008 Switch front-panel:
NO.
1
PWR
2
SYS
3
CONSOLE
4
5
The rear-panel of BDCOM S2008 switch is shown as below：
Speed: 10/100M
Ethernet
interface with LINK/ACT, 100 Mbps indicator.
Speed: 9600bps, RJ45 interface
interface
Figuer 1-1 The front-panel of BDCOM S2008 Switch
Name
Power indicator lights
System Indicator
Console interface
Indicator
on each port.
8
10/100-Base-T
interfaces
BDCOM S2008 Switch Hardware Installation Guide
Features
, cable: MDI/MDIX, UTP (RJ45)
auto-sense
Switch on and indicator lights.
Indicator lights when the system is turning
on.
Indicator blinks when the systems is
functioning.
Implement Switch Local management.
Indicator lights when the linking is normal.
Indicator blinks when data is being sent or
embedded
received.
Indicator lights when the port is in 100M.
Indicator dies out when the port is in 10M.
Implement
transformation
Description
10/100
methenet
signal
- 1 -