Draytek VigorSwitch G2121 Manuale di avvio rapido - Pagina 10
Sfoglia online o scarica il pdf Manuale di avvio rapido per Interruttore Draytek VigorSwitch G2121. Draytek VigorSwitch G2121 15. L2 managed gigabit switch
Stampa la pagina
Combo for Port
On (Green) The device is connected with 1000Mbps.
9 ~ 12
On
(RJ 45
(Amber)
LNK/ACT)
Blinking
Off
On (Green) The device is connected with 1000Mbps.
SFP LNK/ACT
On
(Amber)
Blinking
Off
Interface
Console
RST
RJ 45 LNK/ACT Port 1 ~ 8
PoE for Port 1 ~ 8
SFP LNK/ACT Port 9 ~ 12
The following limitation is suitable for VigorSwitch P2121
Note
Power Output --
IEEE 802.3af Max. 15.4W Output Supported
IEEE 802.3at Max. 30W Output Supported
PoE Power Budget –-
140 Watts (Max)
The device is connected with 10/100Mbps.
The system is sending or receiving data
through the port.
The port is disconnected or the link is failed.
The device is connected with 10/100Mbps.
The system is sending or receiving data
through the port.
The port is disconnected or the link is failed.
Description
Used to perform telnet command control.
Factory reset button.
Press it to reboot the system. (<5 seconds)
The PoE/Alert and SYS LEDs will blink too.
Press it to reset the system with factory
default settings. (5~20 seconds)
The PoE/Alert and SYS LEDs will be off if
RST button is pressed between 5 seconds
and 10 seconds.
Port 1 to Port 8 can be used for Ethernet
connection and PoE connection, depending on
the device connected
Port 9 to Port 12 are used for fiber connection.
Power inlet for AC input (100~240V/AC,
50/60Hz).
3
.