BDE 2010 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Accessories BDE 2010. BDE 2010 6.

Stampa la pagina

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

Caution:

Dear customers, our company will charge fees if your operator mistakenly input incorrect internal

parameters below as a result of service.

Chapter 10 Functions (Only for Agent)

Power On, Press Print key once when counting down (before showing 0 weight).

The display shows: pn，Input M+, G/N, TARE as password. Now entering parameter setups.

The display shows " p0 chk ".

Press TARE Key to move down (Circle).

Press ZERO key to select.

Press M+ or MR to move left or right. Press G/N to escape.

Sub

Func.

SET H

CHK

SET LO

BEEP

AZN 0

REF

0AUTO

0RAGE

0-Tare

SPEED

Zero

MODE

COM

(Not

suitable

out

side of

Taiwan)

BAUD

P3 CAL

DECI

INC

CAP

CAL

COUNT

LOCK

OTH

ANM

P5 unit

Kg/lb

/lb-oz

/tj/ hj

Parameters

Set Hi limit, Press M+ MR to move left or right, Press TARE to add value,

press PRINT to clear value, Press ZERO to confirm.

Set Low limit, Press M+ MR to move left or right, Press TARE to add

value, press PRINT to clear value, Press ZERO to confirm.

Set buzzer mode

no: buzzer off

OK: buzzer on between hi and lo(OK)

ng: buzzer on out of tolerance (NG)

Auto zero tracking: 0.5d, 1d, 2d, 4d

Set zero range: 0%, 2%, 5%, 10%, 20%, 50%, 100%

Manual zero range: 0%, 2%, 4%, 10%, 20%, 50%, 100%

Auto tare function: ON/OFF

Analog to Digital rate: 7.5/15/30/60 times/Second.

Set zero point Value, when the scale shows zero, the screen will

show-–xxx.xxx

RS-232 Mode CONT(Stream send data)

ST1: Stable and send once

STC: Stable and send stream

PR1: Manual press PRINT key to send once

PR2: Manual press PRINT and M+ key to send once and accumulation...

AUTO: Stable send once and accumulation.

ASK: two way communication.

R: Read

T: Tare command

Baud rate: 600/1200/2400/4800/9600

Parity: 7E1/7O1/8N1

0, 0.0, 0.00, 0.000

(Decimal Setting)

Division 1, 2, 5, 10, 20, 50

Full Capacity xxx.xxx

Calibration

Internal count xxx.xxx

Release key lock OFF/ON

ON (Animal Mode)

OFF (Normal Mode)

Select unit（on）。

Tj (Taiwan Kg) and Hj (Hongkong kg) can not be used at the same time.

Shut off Taiwan Kg when Hongkong kg is used.

Z: Zero Command

- 5 -