Electrolux EW 1477 F Manuale d'uso - Pagina 16
Sfoglia online o scarica il pdf Manuale d'uso per Lavatrice Electrolux EW 1477 F. Electrolux EW 1477 F 44. Electrolux washing machines
Anche per Electrolux EW 1477 F: Libretto di istruzioni (25 pagine)
Stampa la pagina
Changing the spin speed/selecting rinse hold
If required, change the spin speed for the final spin/
o select (RINSE HOLD):
Continue pressing the
play for the desired spin speed illuminates.
When this is set J the final rinse water will be
drained at the end of the programme but the wash-
ing will not be spun.
If the o (RINSE HOLD) button is pressed, the wash-
ing remains in the final rinse water and is not spun.
If you do not change the spin speed, the final spin is
automatically adjusted according to the wash pro-
gramme:
– COTTONS/LINEN (light blue)
– EASY CARES (yellow)
– DELICATES (black)
– Í WOOL (black)
– G (MINI-PROGRAMME)
The spin speed for the intermediate spin is
3
dependent on the programme selected. The
intermediate spin can be totally switched off
during the programme using the
button (except in the COTTONS/LINEN (light
blue) programme). The J display will illumi-
nate.
Note: The laundry remains lying in the water until you
drain or spin (see section "Ending a wash cycle").
After 18 hours however, it is automatically drained
and pumped.
Setting the delay timer
The X (DELAY TIMER) button lets you delay the start
of a wash programme by 1 to a maximum of 24
hours.
To do this, continue pressing the X (START DELAY)
button until the desired start delay is shown in the
multi-display, approximately in the form 12h to delay
the start of the programme by 12 hours.
Press the U (START/PAUSE) button; the time
entered will be counted down by the hour.
Cancelling the delay timer
If the display is showing 24h and you press the but-
ton again, the time delay will be cancelled. 0h will
appear followed by the length of the wash pro-
gramme that has been set (display in hours and min-
utes, e. g. 2. 0 6).
The delay timer that has been set is also cancelled if
you turn the programme selector to Ï.
16
K (
SPIN) button until the dis-
1400 rev/min
900 rev/min
700 rev/min
900 rev/min
700 rev/min
K
(SPIN)